Sliding & Patio Doors in Tequesta - Written Price Before Anything Is Ordered

Fast, Reliable Sliding & Patio Doors Across Tequesta

Sliding and patio door replacement in Tequesta typically runs $2,800-$6,400 for a standard opening, with impact-rated units starting around $3,600 installed. Most jobs are scoped, permitted through Palm Beach County, and completed within two to three weeks of contract. Call (772) 362-5402 and we’ll bring the measured survey to your door.

Call (772) 362-5402

We serve Tequesta from our South Florida coordination office, with crews running daily routes through the village and across northern Palm Beach County. The peninsula geography here - nearly surrounded by the Intracoastal Waterway, the Loxahatchee River, and the Jupiter Inlet - means we’ve replaced more salt-corroded aluminum sliders in this zip code than in any inland market we cover. That repetition matters. When our technician arrives at a ranch home off Riverside Drive or a split-level near Tequesta Drive, they’re not guessing at what the frame will look like underneath the trim. They’ve already documented the same failure mode three times that month.

Why Sightline Windows & Doors Jupiter Is Tequesta’s Preferred Sliding & Patio Doors Company

Our Sliding & Patio Doors team has completed hundreds of installations across Tequesta’s 1960s-1980s housing stock. The original aluminum single-pane sliders in these homes were built before Florida’s post-Andrew impact requirements and before marine-grade hardware was standard specification. We know the rough-opening dimensions that were common in that era, the slab settlement patterns that throw off track alignment, and the permitting path through Palm Beach County that keeps the job moving.

Every engagement starts with Haven Clause 1: a measured survey you keep, with the written price stamped to that document before any work begins. The quote and the final invoice are the same paper. No change orders, no “we found rot” surprises. Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. And every finished job leaves with you: the documented photo record, the written warranty, and the 365-Day Done Right Promise stamped under the Haven Standard.

Calls to (772) 362-5402 are answered by a live person, 24/7. Not a callback window. Not a voicemail queue.

Our Sliding & Patio Doors Services in Tequesta

Impact Sliding Glass Doors

Tequesta sits in Florida’s wind-borne debris region, which means any replacement sliding door must either be impact-rated or paired with an approved shutter system. Here’s the local detail that saves our customers money: because Tequesta falls under standard Florida Building Code rather than the High Velocity Hurricane Zone rules that govern Miami-Dade and Broward, sliding and patio door replacements here regularly qualify on Florida Product Approval with a valid wind-load design pressure for the opening - without the Miami-Dade NOA premium some south-Florida crews default to. We specify PGT, CGI, and CWS impact sliders by what the opening actually requires, not by what carries the highest markup. Marine-grade anodized frames and stainless hardware are baseline here, not upgrades. The salt air from the Jupiter Inlet will destroy standard specification within two seasons.

Sliding Glass Door Replacement

On a ranch home off Riverside Drive near the Loxahatchee River, our crew replaced a corroded 1980s aluminum slider whose track had pitted from constant salt air and whose multi-point hardware no longer latched. We set a PGT impact sliding glass door with laminated glass interlayer, marine-grade anodized frame, and stainless rollers, then verified the jamb and drainage plane before final inspection under Palm Beach County permitting. The homeowners later used the door’s wind mitigation documentation to pursue a Florida Statute 627.0629 insurance credit. That sequence - replacement, proper documentation, insurance recognition - is standard on every Tequesta job we run.

Older Tequesta sliders sit on settled slab or shallow-track openings where original rough dimensions are non-standard. Replacements need custom sizing or framing modification and a corrected sill drainage plane. We scope this during the measured survey, price it in the written quote, and photograph the condition before any material is ordered.

Impact French Patio Doors

French patio doors in Tequesta face the same salt-air corrosion cycle as sliders, with the added liability of multi-point locking hardware that seizes when zinc-plated components oxidize. We specify Therma-Tru and ViewLux impact French door systems with stainless multi-point bolts and marine-grade thresholds for every Tequesta installation. The swing-door configuration also demands careful attention to the drainage plane at the sill, particularly on homes where the original slab has settled toward the house - a common condition in the 1970s ranch stock near Tequesta Drive. We correct the slope as part of the rough-opening prep, documented in the photo record you receive.

Screen Door Installation

Screen doors on Tequesta patio openings take a beating from salt air and UV exposure. We install matching screen panels on new slider and French door systems, with fiberglass mesh and aluminum frames that won’t corrode at the corners. Standalone screen door replacements are scoped to the existing track or framed opening, with the same measured-survey process and written pricing.

Before

After

Trusted Brands We Service in Tequesta

We draw from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. For Tequesta installations, we stock marine-grade hardware kits and stainless roller assemblies locally, which means replacement parts for warranty or service calls don’t wait on a Miami warehouse. PGT and CGI impact sliders are our most frequently specified lines for the village’s coastal exposure; Therma-Tru and ViewLux for French door configurations where the customer wants the sightline divided-light aesthetic. Every product carries Florida Product Approval documentation, and we verify the wind-load design pressure against your specific opening before quoting.

Common Sliding & Patio Doors Problems We See in Tequesta Homes

• Salt air oxidation of aluminum frames. The constant onshore breeze from the Jupiter Inlet and Intracoastal Waterway oxidizes standard aluminum slider frames and freezes multi-point hardware. Doors that function perfectly inland seize or fail to latch within two to three seasons of Tequesta exposure. Marine-grade anodizing and stainless components are the fix, not an upsell.
• Non-standard rough openings in 1960s-1980s ranch stock. Tequesta’s original builders used dimensions that don’t match today’s standard catalog sizes. Replacements require custom sizing or framing modification, plus a corrected sill drainage plane. We scope this in the measured survey and price it before ordering material.
• Under-sized or non-rated glazing on older openings. Pre-Andrew sliders lack the design pressure rating required for Palm Beach County wind-borne debris compliance. They’re also ineligible for Florida Statute 627.0629 insurance credits. Impact-rated replacement with proper documentation solves both problems.
• Settled slab throwing off track alignment. Shallow original tracks and decades of slab settlement create binding rollers and leaking sills. We correct the rough opening and install a proper drainage plane as part of standard scope, not as an add-on.

Pricing for Sliding & Patio Doors in Tequesta, FL

We Also Serve Cities Near Tequesta

Our crews run daily routes through Jupiter, Palm Beach Gardens, Jupiter Farms, and North Palm Beach, with the same measured-survey process and written pricing applied to every job. Scheduling and dispatch are coordinated from our South Florida office, with local installation teams serving each market.

FAQs - Sliding & Patio Doors in Tequesta