Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Tequesta, FL
Window installation in Tequesta typically runs $650-$1,400 per opening for standard vinyl or aluminum retrofits, with impact-rated products starting higher due to the village’s wind-borne debris zone requirements. Most Tequesta homes were built between the 1960s and early 1980s with original aluminum single-pane windows that are now past service life, making full-frame replacement the norm rather than the exception. We measure every rough opening on site, produce a written quote you keep, and install to the Haven Standard that has governed every one of our 18,000+ openings since 2012. Call (772) 362-5402 to schedule your free measured survey.
Why Tequesta Homes Are Different
Tequesta sits on a peninsula nearly encircled by the Intracoastal Waterway, the Loxahatchee River, and the Jupiter Inlet. Virtually every residential lot is within direct salt-air exposure range, and the constant onshore breeze from the Inlet accelerates aluminum frame oxidation, weatherstrip degradation, and multi-point door hardware failure far faster than in inland Palm Beach County communities just a few miles west. Every windows-and-doors project here must treat marine-grade corrosion resistance as a baseline requirement, not an upgrade.
The housing stock was developed largely as a planned residential community from the 1960s through the early 1980s, leaving a dense inventory of ranch-style and split-level homes with original aluminum single-pane windows that predate Florida’s post-Andrew impact-glazing requirements. Non-standard rough-opening dimensions in these older homes frequently require custom sizing or framing modification during impact-window retrofits. Tequesta falls under standard Florida Building Code, not the High Velocity Hurricane Zone rules that govern Miami-Dade and Broward, so contractors who primarily work to the south sometimes over-specify HVHZ-only products. A broader range of FBC-compliant impact windows actually qualify here, often at meaningfully lower material cost.
Our Main Tequesta Services
The two services Tequesta homeowners call about most are window replacement and impact protection, though sliding and patio door upgrades are increasingly common as original sliders fail.
Window Replacement in Tequesta
Most Tequesta window replacement projects involve removing original 1960s-1980s aluminum single-pane units and installing impact-rated or energy-efficient replacements sized to non-standard rough openings. We document every frame condition with photos before quoting, and the measured survey you receive becomes the binding scope. Salt-air corrosion on existing hardware often reveals deeper frame damage once we open the wall. Window Replacement in Tequesta
Impact Windows & Doors in Tequesta
Tequesta’s location in Florida’s wind-borne debris region mandates impact-resistant openings or approved shutters for all new installations and full replacements. We specify FBC-compliant products rather than HVHZ-only lines, which opens more manufacturer options and often reduces material cost without sacrificing protection. Every impact product we install carries a documented photo record and the 365-Day Done Right Promise. Impact Windows & Doors in Tequesta
Sliding & Patio Doors in Tequesta
Original sliding glass doors in Tequesta’s older homes suffer from corroded rollers, failed weatherstripping, and frames that no longer seal against wind-driven rain. We replace these with modern multi-panel systems from PGT, CGI, and other verified lines, specifying marine-grade hardware and stainless steel rollers as standard. The measured survey includes sill condition, header load, and drainage plane assessment. Sliding & Patio Doors in Tequesta
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Tequesta
Tequesta’s 1960s-1980s housing stock was built with aluminum single-pane windows that are now well past service life, and the village’s salt-air peninsula environment means frame corrosion often extends beyond what visible inspection reveals. Window Installation here requires measuring non-standard rough openings, assessing structural framing for hidden moisture damage, and specifying products with marine-grade corrosion resistance as baseline, not upgrade.
Single & Double Hung Windows
Signs you need it
Original aluminum frames show pitting or white oxidation, sashes no longer stay open without props, or you feel air movement at the meeting rail during a northeast wind.
What it costs in Tequesta
Single and double hung window installation in Tequesta typically ranges from $650-$1,200 per opening for vinyl or aluminum non-impact units, and $1,100-$2,200 for impact-rated replacements with FBC-compliant glazing.
How we do it
We remove the sash and frame, inspect the rough opening for moisture damage common in salt-air environments, install new marine-grade flashing, set the replacement unit plumb and square, then seal with backer rod and silicone compatible with your siding material.
Horizontal Roller Windows
Signs you need it
Roller mechanism grinds or sticks, the sash jumps the track, or the weep holes are clogged with salt crust preventing drainage.
What it costs in Tequesta
Horizontal roller window installation in Tequesta typically ranges from $700-$1,300 per opening for standard units, and $1,200-$2,400 for impact-rated replacements with laminated glass and reinforced frames.
How we do it
We measure the existing track width and sill slope, order the replacement to maintain proper drainage, install stainless steel rollers and marine-grade track hardware, then test operation under load before sealing the perimeter.
What Window Installation Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Single/double hung, non-impact vinyl or aluminum | $650 - $1,200 |
| Single/double hung, impact-rated | $1,100 - $2,200 |
| Horizontal roller, non-impact | $700 - $1,300 |
| Horizontal roller, impact-rated | $1,200 - $2,400 |
| 3-panel sliding (3-lite roller), impact-rated | $2,800 - $5,500 |
| Casement, impact-rated | $1,400 - $2,800 |
How long does window installation take in Tequesta?
Most Tequesta homes see 8-15 openings completed in one to two days, though older homes with non-standard rough openings or hidden frame corrosion may require additional framing repair. We document any extra work with photos and written scope change before proceeding. Call (772) 362-5402 for a measured survey and exact timeline.
Will my stucco or siding be damaged during window replacement?
We cut stucco with masonry blades designed for minimal breakout and use zip-tool methods for vinyl siding to preserve the courses above and below the opening, though some touch-up is normal on 1960s-1980s homes where original installation methods differ from current standards. Call (772) 362-5402 to discuss your specific exterior.
Door Installation in Tequesta
Tequesta’s salt-air peninsula environment destroys door hardware and frames faster than inland Palm Beach County, and the village’s 1960s-1980s homes often have original entry doors with single-point latches and no impact rating. Door Installation here means specifying marine-grade multi-point hardware, FBC-compliant impact options, and frames that won’t oxidize through in five years.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current entry door has a single deadbolt and no multi-point locking, the frame shows corrosion at the threshold, or your wind mitigation inspection noted inadequate opening protection.
What it costs in Tequesta
Hurricane-proof front and entry door installation in Tequesta typically ranges from $2,200-$4,500 for a standard single door with impact-rated slab and FBC-compliant frame, including multi-point hardware and marine-grade threshold.
How we do it
We remove the existing unit and inspect the jack studs and header for moisture intrusion common in salt-air environments, install a composite or marine-anodized frame with thermal break, hang the impact-rated slab with adjustable hinges, and adjust the multi-point lock for even compression.
French & Double Doors
Signs you need it
The inactive panel no longer seals at the astragal, you see daylight at the meeting stile, or the original doors are single-pane with no impact rating and no egress-compliant hardware.
What it costs in Tequesta
French and double door installation in Tequesta typically ranges from $3,500-$7,000 for impact-rated pairs with laminated glass, marine-grade hardware, and FBC-compliant frames, depending on width and configuration.
How we do it
We verify the header can carry the dead load of wider impact-rated units, install a composite sill pan with end dams, set both panels with consistent margin, then adjust the multi-point and flush-bolt hardware for smooth operation before sealing the perimeter.
What Door Installation Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Standard entry door replacement, non-impact | $1,400 - $2,800 |
| Hurricane-proof front & entry door, impact-rated | $2,200 - $4,500 |
| French & double doors, impact-rated pair | $3,500 - $7,000 |
| Storm & exterior door, aluminum with screen | $800 - $1,600 |
Do I need impact-rated doors if I have shutters?
Approved shutters satisfy the opening protection requirement, but many Tequesta homeowners replace original doors with impact-rated units to eliminate shutter maintenance and improve daily energy performance. Call (772) 362-5402 and we will review your current wind mitigation report at no charge.
Can you match my door to existing window frames?
We carry finish samples from Therma-Tru, ViewLux, and other lines and can coordinate powder-coat or anodized finishes across products, though exact matches to 40-year-old aluminum may require custom color sampling. Call (772) 362-5402 to schedule a finish comparison.
Energy-Efficient Windows in Tequesta
Tequesta’s original 1960s-1980s single-pane aluminum windows transfer heat at rates that strain air conditioning systems through long Florida summers, and the salt-air environment degrades seals faster than inland locations. Energy-Efficient Windows here require Low-E coatings that reject infrared without blocking visible light, argon gas fill that survives our installation methods, and frames with thermal breaks that don’t corrode.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms overheat by mid-afternoon, your air conditioning runs continuously during summer months, or you feel radiant heat through the glass even when the sash is closed.
What it costs in Tequesta
Low-E and argon gas glass upgrades in Tequesta typically add $80-$180 per opening to the base window cost, with total installed prices for energy-efficient replacement windows ranging from $750-$1,500 depending on frame material and size.
How we do it
We specify the appropriate Low-E coating for your orientation, verify argon fill with a spark-discharge meter before installation, and use warm-edge spacers to reduce thermal bridging at the glass perimeter.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows are original single-pane units, your FPL bills spike June through September, or you’re preparing the home for sale and need documented efficiency improvements.
What it costs in Tequesta
ENERGY STAR replacement window installation in Tequesta typically ranges from $800-$1,600 per opening for vinyl or aluminum units with certified U-factor and SHGC ratings appropriate for South Florida’s climate zone.
How we do it
We verify the NFRC label matches your orientation and overhang conditions, install with foam-free methods that don’t trap moisture in salt-air environments, and provide the documentation you need for any available utility program.
What Energy-Efficient Windows Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Low-E/argon upgrade, added to base window | $80 - $180 per opening |
| ENERGY STAR vinyl replacement window | $800 - $1,600 |
| Insulated laminated glass, impact-rated | $1,300 - $2,600 |
| Solar/tinted glass option, added to base | $120 - $250 per opening |
Will energy-efficient windows lower my FPL bill?
Most Tequesta homeowners see measurable reduction in cooling load, though exact savings depend on original window condition, home orientation, and insulation levels; we document before-and-after frame readings when possible. Call (772) 362-5402 for a measured survey and performance estimate.
Does Low-E glass block my view of the Loxahatchee River?
Modern soft-coat Low-E is nearly invisible from inside, with higher light transmission than older hard-coat products; we keep sample cards on every truck so you can verify clarity before ordering. Call (772) 362-5402 to compare coatings in your actual light conditions.
Impact Garage Doors in Tequesta
Tequesta’s location in Florida’s wind-borne debris region means garage doors must resist missile impact or be protected by approved shutters, and the village’s salt-air environment corrodes standard hardware and torsion springs at accelerated rates. Impact Garage Doors here require wind-load-rated sections, reinforced tracks, and hardware specified for marine exposure, not inland conditions.
Hurricane-Rated Garage Doors
Signs you need it
Your current garage door has no wind-load sticker, the sections flex visibly in afternoon thunderstorms, or your wind mitigation report flags the garage as unprotected.
What it costs in Tequesta
Hurricane-rated garage door installation in Tequesta typically ranges from $2,800-$5,500 for a standard two-car opening with impact-rated sections, reinforced track, and wind-load certification for the specific exposure category.
How we do it
We verify the header and jambs can handle the increased weight of impact-rated sections, install a reinforced track system with proper bracing, then test cycle count and auto-reverse before final inspection.
Wind-Load Code Compliance
Signs you need it
You’re replacing a garage door after a failed inspection, your insurance renewal requires updated wind mitigation, or you’re converting a carport to enclosed garage and need compliant opening protection.
What it costs in Tequesta
Wind-load code compliance upgrades in Tequesta typically range from $1,800-$3,800 for structural reinforcement of existing door systems, or $2,800-$5,500 for full replacement with certified impact-rated assemblies.
How we do it
We pull the permit, install to FBC Chapter 16 wind-load requirements for your specific exposure, and schedule inspection with the documented photo record included as standard under the Haven Standard.
What Impact Garage Doors Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Standard garage door replacement, non-impact | $1,200 - $2,400 |
| Hurricane-rated garage door, two-car | $2,800 - $5,500 |
| Wind-load compliance upgrade, existing door | $1,800 - $3,800 |
| Energy-efficient garage door with insulation | $2,200 - $4,200 |
Do I need a permit to replace my garage door in Tequesta?
Yes, Palm Beach County requires a building permit for garage door replacement when wind-load rating or structural attachment changes; we pull permits and schedule inspections as standard practice, included in our written scope. Call (772) 362-5402 and we will verify your permit status at no charge.
Can you match my garage door to my impact windows?
We carry finish samples from multiple manufacturers and can coordinate powder-coat colors across products, though garage door section profiles differ from window frame extrusions; we document the match with photos before ordering. Call (772) 362-5402 to compare samples.
Custom & Geometric Windows in Tequesta
Tequesta’s 1960s-1980s ranch and split-level homes often feature non-standard rough openings, arched transoms, and geometric accent windows that were custom-sized originally and cannot be replaced with stock units. Custom & Geometric Windows here requires measured templates, FBC-compliant impact options in shaped configurations, and marine-grade materials that survive the salt-air peninsula environment.
Arched & Curved Windows
Signs you need it
Your arched transom shows condensation between panes, the curved frame has developed corrosion streaks, or you’re replacing rectangular units and want to restore original architectural character.
What it costs in Tequesta
Arched and curved window installation in Tequesta typically ranges from $1,800-$3,800 for custom-shaped units with FBC-compliant impact glazing, depending on radius complexity and whether the original frame can be preserved.
How we do it
We create a measured template on site, specify the radius to manufacturer tolerances, and install with custom flashing that follows the curve without relying on caulk as the primary seal.
Oversized Openings
Signs you need it
You’re combining multiple small windows into one opening for a view of the Intracoastal, your original picture window has failed seals, or you’re adding a window wall where a solid wall now stands.
What it costs in Tequesta
Oversized opening window installation in Tequesta typically ranges from $3,500-$8,500 for custom impact-rated assemblies with reinforced frames and structural headers, depending on span and glass specification.
How we do it
We verify header capacity with a structural assessment, specify laminated glass with appropriate thickness for the span, and install with continuous sill pan and head flashing before sealing the perimeter.
What Custom & Geometric Windows Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Arched & curved window, custom shaped | $1,800 - $3,800 |
| Geometric & shaped window, triangular or trapezoid | $1,400 - $3,200 |
| Oversized opening, custom impact-rated assembly | $3,500 - $8,500 |
| Custom impact window, non-standard rough opening | $1,600 - $3,500 |
How long do custom windows take to manufacture?
Most custom and geometric windows for Tequesta projects ship in 4-8 weeks depending on shape complexity and glass specification; we template and order only after you approve the written quote, with no deposit required until production begins. Call (772) 362-5402 to discuss timeline for your specific shapes.
Can you replicate my original 1970s arched window exactly?
We can match the sightline profile and overall dimensions, though original 1970s aluminum extrusions are no longer manufactured; we specify modern equivalents with improved thermal performance and marine-grade finish that maintain the visual proportion. Call (772) 362-5402 to review template options.
Brands We Service in Tequesta
We install and service PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux products, stocking common hardware and weatherstrip components for faster turnaround on Tequesta service calls. We specify by performance tier and price range, not by margin. See our brands for detailed specifications.
Pricing for Windows & Doors in Tequesta, FL
| Service | Typical range in Tequesta |
|---|---|
| Single/double hung window, non-impact | $650 - $1,200 |
| Single/double hung window, impact-rated | $1,100 - $2,200 |
| Horizontal roller window, impact-rated | $1,200 - $2,400 |
| 3-panel sliding window, impact-rated | $2,800 - $5,500 |
| Casement window, impact-rated | $1,400 - $2,800 |
| Standard entry door, non-impact | $1,400 - $2,800 |
| Hurricane-proof entry door, impact-rated | $2,200 - $4,500 |
| French & double doors, impact-rated pair | $3,500 - $7,000 |
| ENERGY STAR replacement window | $800 - $1,600 |
| Low-E/argon upgrade, per opening | $80 - $180 |
| Hurricane-rated garage door, two-car | $2,800 - $5,500 |
| Arched & curved custom window | $1,800 - $3,800 |
Prices in Tequesta increase when hidden frame corrosion requires structural repair, when non-standard rough openings need custom sizing, or when HVHZ-only products are unnecessarily specified by contractors unfamiliar with standard FBC requirements. Every quote we produce is written, line-itemed, and binding; the measured survey you keep and the final invoice are the same document under Haven Clause 1.
Neighborhoods We Serve in Tequesta
We work throughout the Tequesta peninsula, from the riverfront properties along the Loxahatchee to the interior ranch neighborhoods. Crews are dispatched from our South Florida scheduling office and typically arrive within standard Palm Beach County response times.
- River Ridge
- Tequesta Country Club
- Contillo Estates
- Lighthouse Pointe
- North Passage
Service Area - Cities Near Tequesta
We install windows and doors across northern Palm Beach County and southern Martin County, with regular work in Jupiter, FL, Palm Beach Gardens, FL, Jupiter Farms, FL, and North Palm Beach, FL. Scheduling and dispatch are coordinated from our Miami office; crews serve Tequesta locally with the same written-price standard applied to every engagement.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Tequesta
Yes, Palm Beach County requires a building permit for window replacement when the product or installation method changes the wind-load or energy performance of the opening; we pull permits and pass inspections as standard practice, with documentation included in every job record.
Approved shutters satisfy Florida Building Code opening protection requirements, but many Tequesta homeowners prefer impact-rated windows to eliminate shutter installation, storage, and maintenance; we review your wind mitigation report and insurance requirements at no charge to help you decide.
We schedule measured surveys with written quotes, not verbal estimates; most Tequesta homeowners receive their appointment within a few days of calling, and the written price you receive is the price on the final invoice. Call (772) 362-5402 to schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tequesta Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.