Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Tequesta
Impact window and door installation in Tequesta, FL typically runs $650-$1,400 per opening for vinyl-framed, impact-rated units, with full-home retrofits on 1960s-80s ranch and split-level homes commonly falling between $12,000 and $28,000 depending on rough-opening conditions and frame modifications. Most measured surveys in Tequesta are scheduled within 48 hours, and our crews coordinate dispatch from our South Florida office to work locally without the overhead of a distant contractor.
We know Tequesta’s peninsula lots, the narrow setbacks along the Intracoastal, and the specific corrosion pressure that salt air from the Loxahatchee River and Jupiter Inlet puts on every frame and hinge. Our Impact Windows & Doors team has worked the tight driveways off Tequesta Drive, the shared walls near Coral Cove Park, and the original 1970s housing stock that makes standard sizing a rarity. Call (772) 362-5402 to schedule your free measured survey - the written price we leave with you is the price on the invoice.
Why Sightline Windows & Doors Jupiter Is Tequesta’s Preferred Impact Windows & Doors Company
We have completed impact window and door installations on Tequesta homes from the riverfront properties near the Jupiter Inlet to the interior streets around Tequesta Drive and County Line Road. Our reviews from Tequesta customers consistently cite two things: the measured survey they keep, and the photo record we deliver at completion. The Haven Standard requires both.
Response time to Tequesta is typically next-day or within 48 hours for measured surveys, because our crews are already working northern Palm Beach County. We do not dispatch from Miami-Dade or Broward with a three-hour drive and a fuel surcharge.
Our local knowledge is specific. We know that Tequesta falls under the Florida Building Code wind-borne debris region, not the High Velocity Hurricane Zone that governs Miami-Dade and Broward. Contractors who primarily work south of here often specify HVHZ-only products with Miami-Dade NOA documentation that raises material cost without adding performance benefit for a Tequesta address. We specify by what the opening and the code actually require.
Every technician who arrives at a Tequesta home is background-checked, uniformed, and identified by license number before crossing the threshold - Haven Clause 3, Verified Crews. The person at your door matches the person on the record.
Our Impact Windows & Doors Services in Tequesta

Hurricane Impact Windows
Tequesta’s position at the northern tip of Palm Beach County, adjacent to the Jupiter Inlet and Atlantic, places every home in Florida’s wind-borne debris region. Hurricane impact windows are mandatory for new construction and strongly advisable for retrofits of the original 1960s-80s single-pane aluminum units that still dominate Tequesta’s housing stock. We specify PGT and CGI lines with FBC-compliant impact ratings, not over-built HVHZ assemblies that add cost without code benefit here. The Low-E insulated glass units we install reduce afternoon solar heat gain, which matters on Tequesta’s east- and south-facing lots that take direct sun off the water.

Vinyl Impact Windows
Vinyl framing with marine-grade hardware has become our standard recommendation for Tequesta impact retrofits. The salt-air exposure from the Intracoastal Waterway, Loxahatchee River, and Jupiter Inlet oxidizes standard aluminum frames and degrades weatherstripping at a rate we do not see in inland Palm Beach County communities like Wellington or Royal Palm Beach. Vinyl does not corrode. We pair vinyl frames from CWS and ViewLux with stainless steel or marine-grade anodized hardware as baseline specification, not as an upsell. The U-factor and SHGC ratings are documented on the quote so you can compare product tiers directly.

Single Hung Impact Windows
Single hung impact windows remain the most common replacement for Tequesta’s original aluminum units in bedrooms, bathrooms, and secondary living spaces. The fixed upper sash and operable lower sash match the sightlines of the original 1970s installations. On a recent job off Tequesta Drive, our crew replaced original single-pane aluminum sliders with PGT impact-rated glazing in vinyl frames, but the non-standard rough openings in the split-level meant we had to rework jamb depths and add custom frames before the sashes would sit true. We staged the truck on the swale, kept the driveway clear, and worked within Tequesta’s noise hours so we didn’t lose a day to a neighbor complaint. The new Low-E insulated glass units cut the afternoon heat load noticeably, and the wind mitigation report gave the homeowner documentation for the insurance credit under Florida Statute 627.0629.

Double Hung Impact Windows
Double hung impact windows suit Tequesta’s larger living rooms and master suites where both sashes need to operate for cross-ventilation. The tilt-in feature matters on second-story split-level installations where exterior cleaning access is limited by narrow setbacks. We measure the rough opening to the sixteenth, document it on the survey you keep, and specify the frame depth required for proper installation. Non-standard openings in Tequesta’s 1960s-80s housing stock frequently require custom sizing or framing modification; we identify this during the measured survey and price it into the written quote, not as a change order after demolition.

Wind Mitigation & HVHZ Code Compliance
This is where Tequesta’s geography creates genuine confusion. Tequesta sits in Palm Beach County under standard Florida Building Code wind-borne debris requirements, not the High Velocity Hurricane Zone rules that govern Miami-Dade and Broward. Contractors who primarily work to the south sometimes over-specify HVHZ-only products, while a broader range of FBC-compliant impact windows actually qualify here, often at meaningfully lower material cost. We verify the code jurisdiction for your specific Tequesta address, specify the correct product tier, and provide the wind mitigation documentation your insurer requires for premium credit under Florida Statute 627.0629. The report is included; it is not an additional service.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Tequesta
We install from eight verified manufacturer lines, specifying by performance tier and price range rather than by margin. For Tequesta’s salt-air environment, we most frequently draw from PGT’s WinGuard vinyl series, CGI’s Estate Collection with marine-grade hardware, CWS’s Aria impact line, and ViewLux’s coastal-rated assemblies. We do not stock inventory in a warehouse and push what is available; we order to the measured opening after the survey is complete. Lead times vary by manufacturer and season, and we state them on the written quote so you can schedule accordingly.
Common Impact Windows & Doors Problems We See in Tequesta Homes

- Salt-air corrosion of aluminum frames and hardware. Virtually every Tequesta lot is within direct salt-air exposure range of the Intracoastal Waterway, Loxahatchee River, or Jupiter Inlet. Standard aluminum frames oxidize, weatherstrip degrades, and multi-point door hardware fails far faster than in inland Palm Beach County. We see this on homes three years after a cheap retrofit with non-marine-grade products.
- Non-standard rough openings in 1960s-80s ranch and split-level homes. Tequesta’s housing stock was developed largely between the 1960s and early 1980s with original aluminum single-pane windows that predate modern impact-glazing requirements. Rough openings vary by builder and era. Impact retrofits that aren’t custom-sized or framed correctly lead to air infiltration, water intrusion, and failed inspections.
- Premature hardware failure from incorrect material specification. Standard (non-marine-grade) hinges, locks, and multi-point systems corrode in Tequesta’s onshore salt breeze. We specify stainless steel or marine-grade anodized hardware as baseline, because replacement of failed hardware on an installed impact unit is labor-intensive and avoidable.
- Job-site access and neighbor relations on dense peninsula lots. Tequesta’s narrow setbacks and limited street parking mean staging requires planning. Crews that ignore noise ordinances or block shared driveways risk stop-work orders and complaints. We coordinate truck placement, material delivery timing, and work hours to keep the site operational and the neighbors unbothered.
Pricing for Impact Windows & Doors in Tequesta, FL
These are the price ranges we have written on measured surveys for Tequesta homes in the past 24 months. Your specific quote depends on rough-opening condition, frame material, glass specification, and whether custom framing is required for non-standard 1970s construction.
| Service | Typical Range in Tequesta |
|---|---|
| Single opening (vinyl impact window, standard size) | $650 - $1,400 |
| Single opening (custom size or frame modification required) | $1,200 - $2,200 |
| Sliding glass door (impact-rated, vinyl frame) | $2,800 - $5,500 |
| Entry door with impact glass (Therma-Tru or comparable) | $3,500 - $7,000 |
| Full-home retrofit (12-20 openings, typical Tequesta ranch) | $12,000 - $28,000 |
| Wind mitigation inspection and documentation | Included with installation |
Factors that move a Tequesta job toward the higher end: non-standard rough openings requiring jamb rework, second-story installations with limited ladder access, marine-grade hardware upgrade from a competitor’s baseline quote (we include it), and permit coordination when the original construction predates digital records. The measured survey we complete and you keep documents every condition before pricing. Call (772) 362-5402 to schedule yours - estimates are free, and we review competitor written quotes at no charge under our Free Second Opinion policy.
We Also Serve Cities Near Tequesta

Our crews work northern Palm Beach County continuously, and we schedule measured surveys across Jupiter, Palm Beach Gardens, Jupiter Farms, and North Palm Beach from the same local dispatch. If you are comparing contractors across these markets, the product specification and code requirements are similar, but salt-air exposure decreases as you move west of the Intracoastal. We account for this in hardware and frame recommendations. Impact Windows & Doors in Tequesta remains our focus on this page, and we route crews by proximity to keep response times short.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Tequesta

No. Tequesta falls under standard Florida Building Code wind-borne debris requirements, not the High Velocity Hurricane Zone that governs Miami-Dade and Broward. A broader range of FBC-compliant impact windows qualify here, and we specify accordingly rather than adding cost for unnecessary HVHZ-only assemblies. Call (772) 362-5402 and we will verify the code jurisdiction for your specific address during the measured survey.
Tequesta’s peninsula geography places virtually every residential lot within direct salt-air range of the Intracoastal Waterway, Loxahatchee River, or Jupiter Inlet. The constant onshore breeze carries salt that oxidizes aluminum frames, degrades weatherstripping, and seizes multi-point door hardware at a rate we do not observe in inland Palm Beach County communities just a few miles west. We specify marine-grade anodizing and stainless hardware as baseline for every Tequesta job. Call (772) 362-5402 for a written quote that includes these specifications.
Yes, if your insurer participates. Florida Statute 627.0629 requires insurers to provide discounts for wind mitigation improvements that are documented by a qualified inspector. We provide the wind mitigation report and photo documentation as standard on every completed installation, not as an add-on. The discount amount depends on your carrier and policy; we do not guarantee a specific dollar reduction. Call (772) 362-5402 to schedule installation and documentation.
Yes. We have worked the narrow setbacks and shared driveways typical of Tequesta’s peninsula lots. Our crew stages trucks on swales or coordinated street parking, delivers materials in timed drops to avoid blocking access, and works within Tequesta’s noise and work-hour ordinances. We plan this during the measured survey and note any access constraints on the written scope so there are no surprises on installation day. Call (772) 362-5402 to discuss your specific site conditions.
Probably not without modification. Tequesta’s 1960s-80s ranch and split-level homes were built with non-standard rough openings that predate modern impact-glazing requirements. We measure to the sixteenth, identify framing modifications needed, and price custom sizing or jamb rework into the original written quote. The survey document you keep shows exactly what we found and what we priced. Call (772) 362-5402 to schedule a measured survey - estimates are free, and we review competitor quotes at no charge.
Ready for your written price? Call (772) 362-5402 to schedule your free measured survey. Every Tequesta installation is covered by our 365-Day Done Right Promise under the Haven Standard: if it’s not done right, we make it right. You receive the measured survey, the written scope, the documented photo record, and the warranty - all in writing before any work starts.
Written by Sonia Raman, Owner at Sightline Windows & Doors, independently owned and operated under the Haven Standard since 2012.










Before
After
Before
After
Before
After