Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Trusted Sliding & Patio Doors for Jupiter Homeowners
Sliding & Patio Doors in Jupiter typically cost between $2,800 and $7,500 for installation and replacement, depending on size, impact rating, and frame material, with most projects scheduled within one to two weeks of the measured survey. Sightline Windows & Doors Jupiter has installed and replaced over 18,000 openings since 2012, every one with a written price before work started and a documented photo record when finished. Call (772) 362-5402 to schedule your measured survey.
Jupiter’s coastal location means every exterior door faces salt air, hurricane-force wind loads, and the thermal stress of South Florida’s wet season. We’ve measured openings in Abacoa, Jupiter Inlet Colony, and along the Loxahatchee River where standard-grade hardware corrodes within three years and non-impact glass fails inspection at resale. Our technicians arrive uniformed, background-checked, and identified by license number. The quote you receive is the measured survey itself - Haven Clause 1 - and it does not change once work begins.
What Our Sliding & Patio Doors Service Includes
Patio Doors
Patio doors are the primary glazed entry point between conditioned interior space and outdoor living areas in Jupiter homes, typically spanning 6 to 12 feet in width with either sliding or swinging operation. You’ll need a new patio door when the existing unit shows frame rot, operability failure, or when the National Fenestration Rating Council (NFRC) labels indicate U-factors above 0.35 and SHGC above 0.25 - thresholds that drive cooling costs up in Jupiter’s climate. At Sightline Windows & Doors Jupiter, we measure the rough opening to 1/16-inch precision, specify the glazing package to the exposure, and deliver a written price before any manufacturer order is placed.

Impact Sliding Glass Doors
Impact sliding glass doors combine laminated glass assemblies with reinforced frames rated to withstand missile impact and cyclic pressure per Florida Building Code TAS 201, 202, and 203 - required for all Jupiter properties in the High Velocity Hurricane Zone. You need impact-rated replacement when your existing doors carry only temporary protection certifications, when the laminated interlayer has delaminated at the edges, or when your windstorm inspection report flags non-compliant hardware. Sightline specifies impact sliding glass doors from PGT and CGI with documented Miami-Dade Notice of Acceptance (NOA) numbers, and we pull the permit and schedule the inspection as part of the written scope.

Sliding Glass Door Replacement
Sliding glass door replacement becomes necessary when rollers fracture, tracks deform, or the thermal break in aluminum frames fails - common in Jupiter units installed before 2010 when single-pane and non-thermally-broken construction was still standard. We see this most often in Jupiter Farms and The Acreage, and also with Hobe Sound Sliding & Patio Doors, where original construction doors face unshaded western exposure and the rolling hardware seizes within eight to twelve years. Our replacement process includes removal of the existing unit to the rough opening, inspection of the sill pan and flashing for water intrusion, and installation of the new door with a documented photo record of each phase - Haven Clause 4, Evidence on Every Job.

Impact French Patio Doors
Impact French patio doors pair the divided-lite aesthetic with hurricane-rated construction, using either out-swing or in-swing operation with multi-point locking hardware. Jupiter homeowners specify these when the architectural review board of communities like Admirals Cove or the Loxahatchee Club requires a traditional sightline, or when the existing French doors leak at the astragal during driving rain. Sightline measures the daylight opening, calculates the structural load at the header, and specifies the hardware finish from the manufacturer’s catalog - not from warehouse stock - so the lockset, hinge, and handle match the interior specification exactly.

Screen Door Installation
Screen door installation for sliding patio units involves either a factory-integrated screen track or a retrofitted sliding screen panel, depending on the host door’s extrusion design. In Jupiter, where no-see-ums and mosquitoes render unscreened openings unusable for six months annually, a properly fitted screen with 20×20 mesh and stainless steel or bronze hardware is functional infrastructure, not an accessory. We measure the screen pocket depth, verify the roller carrier compatibility, and install with the same written-price protocol as the primary door - no add-on pricing after the fact.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Sliding & Patio Doors

We’ve specified and installed PGT sliding and patio door systems in Jupiter since 2014, including their WinGuard vinyl and aluminum impact lines with documented NOA compliance for Palm Beach County permitting, and also offer Sliding & Patio Doors in Palm Beach Gardens. Our technicians carry PGT roller assemblies, track caps, and screen panel hardware on every truck, and we’ve replaced more than 400 PGT units in Jupiter, Tequesta, and Palm Beach Gardens - each with the measured survey, written price, and photo record that the Haven Standard requires.
Therma-Tru fiberglass patio door systems require different expertise: we’ve fitted their Pulse and Classic-Craft lines in Jupiter Inlet Colony and along Beach Road where the salt air degrades steel frames and the homeowner wants the thermal performance of a polyurethane core. We also install our Sliding & Patio Doors in North Palm Beach. ViewLux sliding systems, specified for their narrow sightlines and high light transmission, we’ve installed in contemporary homes in Abacoa where the architect specified minimal frame interruption. Whether you have PGT, Therma-Tru, ViewLux, or any other make, we can help - our measured survey identifies the manufacturer, series, and date code from the glass etch or frame stamp, and we source OEM hardware rather than universal replacements.
Before
AfterSigns You Need Sliding & Patio Doors Right Now
- The door requires shoulder force to move on its track. This indicates roller collapse, track deformation, or frame racking - and in Jupiter’s humidity, the effort accelerates wear on the handle set and lock mechanism. We’ve measured units in Jupiter Farms where the homeowner compensated for two years, only to find the header had sagged and the rough opening required reframing.
- Visible moisture or mineral staining at the sill or jamb. Water intrusion at a patio door sill damages subflooring and wall framing before it appears on interior drywall. In our Jupiter inspections, we use a moisture meter at the sill plate and document readings above 16% as requiring immediate remediation - the threshold where mold colonization begins.
- The glass shows condensation between panes. Seal failure in an insulated glass unit (IGU) means the desiccant is saturated and the low-e coating is degrading from oxygen exposure. Jupiter’s afternoon thunderstorms and high dew points make this failure mode common; the unit needs replacement, not defogging.
- Your windstorm inspection report flags non-compliant hardware or glazing. Jupiter properties in the HVHZ must carry current Miami-Dade or Florida Product Approval documentation for all exterior glazed doors. If your inspector notes missing or expired ratings, replacement is required for insurance compliance and resale.
- The frame shows chalking, pitting, or white corrosion bloom. Coastal salt air within two miles of the Atlantic - including all of Jupiter Island, Juno Beach, and eastern Jupiter - attacks anodized aluminum and powder-coated steel. We specify 6063-T5 aluminum with AAMA 2605 fluoropolymer finish or vinyl construction for these exposures, documented in the measured survey.
Our Sliding & Patio Doors Process - Step by Step

- 1
Measured survey and documented assessment. Our technician arrives at your Jupiter property with a laser measure, digital level, and moisture meter. We record the daylight opening width and height at three points, check the header for level, and photograph the existing unit’s condition, manufacturer markings, and any water damage. You keep a copy of this survey - Haven Clause 1, Have It in Writing - and it becomes the basis for the quote.
- 2
Written price and product specification. Within 24 hours, you receive a single document: the measured survey, the product specification by manufacturer and series, the glazing package with U-factor and SHGC ratings, and the fixed price. This is not an estimate. The measurement and the quote are the same document, and the price does not change unless you change the scope.
- 3
Permit application and scheduling. For all impact-rated and new-opening installations in Jupiter, Sightline pulls the building permit and schedules required inspections. We include the permit number in your project file and confirm the inspection dates before work begins - Haven Clause 2, Arrive on Schedule.
- 4
Installation with photo documentation. Our background-checked, uniformed crew removes the existing unit, inspects and repairs the rough opening as specified, installs the new door with manufacturer-approved fasteners and sealants, and tests all operation. Every phase is photographed: before, during, and after. You receive the photo record with the final invoice.
- 5
Final inspection and 365-Day Done Right Promise activation. We pass the municipal inspection, demonstrate the door operation and maintenance points, and leave the documented warranty - Haven Clause 5, No Surprises. If anything is not done right within 365 days, we make it right. This is written into the Haven Standard, not offered as a courtesy.
How Much Does Sliding & Patio Doors Cost in Jupiter?
A typical sliding glass door replacement in Jupiter runs $3,200-$5,800 for a standard 6-foot vinyl unit with impact-rated glazing, and $5,500-$9,200 for a 12-foot multi-slide aluminum system with thermally broken construction. Impact French patio doors in Jupiter typically range from $4,800-$8,500 depending on divided-lite configuration and hardware grade. Screen door installation, when paired with a primary door replacement, adds $380-$650; as a standalone retrofit, $520-$890 depending on mesh specification and frame finish.
Several factors move these ranges. Frame material: vinyl costs less than aluminum, which costs less than aluminum-clad wood or fiberglass. Glazing package: impact-rated laminated glass adds 35-50% over non-impact, but is required in Jupiter’s HVHZ and often specified for insurance discounts. Size and operation: a standard two-panel slider is simpler than a three-panel stacking system or a lift-slide door with concealed hardware. Installation condition: replacement in kind, where the rough opening is sound, costs less than reframing for a larger unit or repairing water-damaged structural members.
To avoid overpaying, demand a measured survey you can verify, product specifications with manufacturer and series named, and a written price that references those exact measurements. Sightline’s quote is the survey document itself - no allowance items, no “plus materials” clauses, no change orders for conditions that visible inspection should have revealed. Our free estimate includes the measured survey, the written scope, and the fixed price. Bring us a competitor’s written quote and we will review it at no charge - our Free Second Opinion on Any Written Estimate.
| Service | Typical Range in Jupiter | Key Variables |
|---|---|---|
| Standard sliding glass door replacement (6 ft, vinyl, impact) | $3,200 - $5,800 | Frame color, hardware finish, screen inclusion |
| Large-format multi-slide door (12 ft, aluminum, thermal break) | $5,500 - $9,200 | Panel count, lift-slide hardware, track configuration |
| Impact French patio doors (pair, fiberglass or aluminum) | $4,800 - $8,500 | Lite division, multi-point lock grade, sidelight inclusion |
| Screen door installation (standalone retrofit) | $520 - $890 | Mesh density, frame material, roller carrier type |
| Screen door installation (with primary door replacement) | $380 - $650 | Integrated vs. add-on track system |
Sliding & Patio Doors Near Jupiter - Our Service Area

We install and replace sliding and patio doors throughout northern Palm Beach County and southern Martin County, with measured survey appointments typically available within three to five business days in Jupiter, Tequesta, and Palm Beach Gardens. Properties in Jupiter Farms and The Acreage may require additional lead time for the permit routing to Palm Beach County’s western service center. We also work regularly in North Palm Beach, Lake Park, Hobe Sound, West Palm Beach, Westgate, Royal Palm Beach, and Palm Beach. If you’re comparing options across the area, see our dedicated pages for Sliding & Patio Doors in Tequesta and Sliding & Patio Doors in Palm Beach Gardens for pricing and service specifics in those markets.
Serving Jupiter, FL - Our Local Coverage Area
We’re based in the Jupiter area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Sliding & Patio Doors in Jupiter

A sliding and patio door service includes the measured survey of your existing opening, specification of the replacement or new-install unit by manufacturer and performance rating, permit procurement, removal of the existing door, installation of the new unit with approved fasteners and sealants, operational testing, municipal inspection, and a documented photo record of the completed work. At Sightline Windows & Doors Jupiter, every engagement also includes the 365-Day Done Right Promise written into the Haven Standard.
Most sliding and patio door replacements in Jupiter are completed in one working day; large-format multi-panel systems or jobs requiring rough-opening repair may extend to two days. The measured survey appointment takes 45-60 minutes, and the written price is delivered within 24 hours. Permits in Palm Beach County typically issue in 5-10 business days for replacement-in-kind, longer for new openings or structural modifications. Call (772) 362-5402 to check current scheduling.
Sliding and patio door installation in Jupiter typically ranges from $3,200 for a standard 6-foot impact-rated vinyl slider to $9,200 for a large-format thermally broken aluminum multi-slide, with French patio doors falling between $4,800 and $8,500. The exact price depends on the measured dimensions, frame material, glazing specification, and installation conditions - which is why Sightline provides the written price only after the measured survey, never over the phone. Call (772) 362-5402 for your free measured survey and written quote.
Yes. We specify, install, and service PGT, Therma-Tru, ViewLux, and Mr-Glass sliding and patio door systems, and we can source OEM parts and warranty service for all eight manufacturer lines in our portfolio. Our technicians identify the manufacturer and series from the glass etch or frame stamp during the measured survey, so the replacement unit or repair part matches exactly. Call (772) 362-5402 to schedule a survey for any brand.
We answer calls live 24 hours a day, and we prioritize situations where a failed door creates a security exposure or weather intrusion risk - such as impact glass fracture after a storm or lock failure with the door unable to secure. True emergency fabrication of custom units is limited by manufacturer lead times, but we can often install temporary secure closure and expedite the replacement order. For urgent situations, call (772) 362-5402 and our live operator will dispatch the appropriate response.
Every sliding and patio door installation is covered by Sightline’s 365-Day Done Right Promise: if it’s not done right, we make it right, with no deductible or service fee. This is Haven Clause 5, written into every job file, not a verbal assurance. Manufacturer warranties on the door unit, glass, and hardware run 10 years to lifetime depending on the brand and series, and we register these on your behalf with documentation you receive at completion.
Clear a path to the interior side of the door and remove window treatments that obstruct the frame; our technician needs to measure the daylight opening and inspect the sill, jamb, and header condition. If you have a recent windstorm inspection, insurance appraisal, or competitor quote, have it available - our Free Second Opinion on Any Written Estimate means we’ll review it at no charge. The measured survey itself takes 45-60 minutes, and you’ll leave with a copy in hand. Call (772) 362-5402 to schedule.
Schedule Your Sliding & Patio Doors Service in Jupiter Today
Call (772) 362-5402 to schedule your free measured survey. You’ll receive a written price before any work starts, a background-checked and uniformed technician identified by license number, and a documented photo record when the job is done. The Haven Standard has governed every one of our 18,000+ installations since 2012. We’re independently owned and operated, and we answer live, 24 hours a day.
Written by Sonia Raman, Owner at Sightline Windows & Doors Jupiter, serving Jupiter, FL since 2012.










Before
After
Before
After
Before
After