Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Palm Springs, FL
Window and door installation in Palm Springs, FL runs $380 to $1,400 per opening depending on frame type, glazing specification, and whether the existing opening is a original jalousie or aluminum slider that needs full-frame removal. Most jobs in this village require impact-rated, Florida Product Approval-compliant units to satisfy current Palm Beach County permitting and insurer requirements. Call (772) 362-5402 to schedule your measured survey and written estimate.
We install and replace windows and doors across Palm Springs’s concentrated stock of post-WWII CBS homes, where original fenestration predates Hurricane Andrew-era codes by decades and non-renewal notices from insurers are now routine. Our Window Installation process begins with the measured survey you keep, and the written quote cannot differ from that document. Every opening gets a documented photo record at completion under the Haven Standard.
Why Palm Springs Homes Are Different
Palm Springs sits roughly 5 miles inland from the Atlantic, squarely inside Palm Beach County’s high-velocity hurricane wind zone. The village’s residential core is overwhelmingly modest, single-story CBS homes built between roughly 1950 and 1975, most still carrying original jalousie louvered windows or early-generation aluminum sliders. Neither opening type meets current Florida Building Code wind-load or impact-resistance standards, and the high share of long-term owner-occupants and rental conversions means a large backlog of wholly unreplaced original fenestration.
The local climate accelerates deterioration. Sustained UV exposure oxidizes aluminum frames and destroys glazing seals within years, while tropical-storm and hurricane winds make unprotected openings a structural liability. County code now requires impact-rated glazing or approved storm protection on any permitted replacement. Jalousie windows, ubiquitous in the 1950s-60s stock, are specifically flagged by multiple Florida homeowners’ insurers as an uninsurable opening type. A technician canvassing the older blocks will routinely find homeowners holding cancellation letters and needing full-frame impact replacements permitted through Palm Beach County’s building department before their next renewal date.
Our Main Palm Springs Services
These are the two services Palm Springs homeowners call about most, plus sliding and patio door work for homes opening onto rear courtyards and pool enclosures common in the village’s older blocks.
Window Replacement in Palm Springs
Full-frame window replacement in Palm Springs means removing jalousie or single-track aluminum units and installing Florida Product Approval-rated, impact-resistant windows that satisfy Palm Beach County permitting and insurer requirements. We measure every existing opening, document frame conditions including CBS wall thickness and anchor accessibility, and specify PGT or CGI impact-rated units matched to the wind-load zone. Window Replacement in Palm Springs is priced from the measured survey you keep, with no change orders once the scope is written.
Impact Windows & Doors in Palm Springs
Impact windows and doors for Palm Springs homes are not an upgrade category; they are the minimum standard for permitted replacement and insurability. We specify laminated impact glass, reinforced frames, and hardware tested to ASTM E1886/E1996 protocols, pulling permits through Palm Beach County and scheduling inspections to match your renewal timeline. Impact Windows & Doors in Palm Springs installations include the documented photo record and 365-Day Done Right Promise on every job.
Sliding & Patio Doors in Palm Springs
Sliding and patio door replacement in Palm Springs addresses the single-track aluminum sliders common in 1960s-70s additions and rear courtyard openings, which corrode in the salt-tinged inland air and fail to seal against wind-driven rain. We install multi-panel impact-rated sliding systems with stainless steel rollers and composite tracks, measured to the exact sightline of your existing opening. Sliding & Patio Doors in Palm Springs jobs are scoped from the same measured survey, with the written price fixed before work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Palm Springs
Window installation in Palm Springs means working within concrete block structure walls built before modern anchor standards, where original jalousie and single-track aluminum frames were never designed to resist the wind loads Palm Beach County now enforces. Most homeowners come to us with an insurer non-renewal notice or a failed inspection, needing full-frame replacement with Florida Product Approval-rated impact units before a deadline. Our Window Installation process starts with the measured survey you keep, specifies the exact PGT or CGI unit for each opening, and ends with a documented photo record and passed inspection.
Single & Double Hung Windows
Signs you need it
Your jalousie windows no longer seal against rain, your insurer has flagged them as uninsurable, or the aluminum frame shows oxidation and the sash cords or balances have failed.
What it costs in Palm Springs
Single and double hung impact window installation in Palm Springs typically runs $480 to $920 per opening for vinyl-framed units and $720 to $1,340 for aluminum-clad or composite frames.
How we do it
We remove the existing frame including jalousie hardware, inspect the CBS rough opening for anchor integrity, install Florida Product Approval-rated impact units with stainless steel fasteners, seal with backer rod and polyurethane, and schedule Palm Beach County inspection.
Horizontal Roller Windows
Signs you need it
The existing aluminum slider track is corroded, the sash jumps or sticks, or you need egress-compliant openings for bedrooms that current jalousie windows cannot satisfy.
What it costs in Palm Springs
Horizontal roller impact window installation in Palm Springs typically runs $520 to $980 per opening for standard sizes and $780 to $1,420 for oversized or high-impact-rated units.
How we do it
We measure the exact sightline of the existing slider, specify the roller system and frame depth for your CBS wall thickness, install with continuous sill pan flashing, and document the operable sash clearance and lock engagement in your photo record.
What Window Installation Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Single/Double Hung Impact Window | $480 - $1,340 |
| Horizontal Roller Impact Window | $520 - $1,420 |
| Full-frame removal and disposal (per opening) | $85 - $140 |
Do you pull permits for window installation in Palm Springs?
Yes. Palm Beach County requires a building permit for all window replacements, and we pull and schedule inspections on every job. The permit cost is itemized in your written quote, not added later. Call (772) 362-5402 to review the permit timeline for your project.
How long does window installation take in Palm Springs?
Most Palm Springs homes see 8 to 12 openings completed in two to three working days, assuming no structural repairs to the CBS rough opening. Jalousie removals add roughly 30 minutes per opening for hardware extraction and surface prep. Call (772) 362-5402 for a schedule based on your opening count.
Door Installation in Palm Springs
Door installation in Palm Springs addresses the same code and insurance pressures as window work, with the added complexity of entry doors being primary structural and security elements in CBS construction where the original frame may be embedded in concrete. Most 1950s-70s homes have hollow-core or early steel doors in aluminum frames that fail impact tests and corrode at the threshold. Our Door Installation specifies Therma-Tru or CGI impact-rated entry systems with composite or stainless steel thresholds, measured to your exact rough opening and priced from the survey you keep.
Entry Doors
Signs you need it
The door slab is delaminating, the frame shows corrosion at the threshold, or your insurer requires a solid-core or impact-rated entry door for renewal.
What it costs in Palm Springs
Entry door installation in Palm Springs typically runs $680 to $1,240 for fiberglass impact-rated units and $920 to $1,580 for steel or custom-specified systems.
How we do it
We remove the existing door and frame, inspect the CBS rough opening for anchor placement and threshold drainage, install the pre-hung impact-rated unit with stainless steel fasteners, seal with polyurethane and backer rod, and verify lockset function and weatherstrip compression.
Hurricane-Proof Front & Entry Doors
Signs you need it
You have received a wind mitigation inspection failure, your current door lacks a Florida Product Approval number, or you want to eliminate the need for a storm panel or accordion shutter on your primary entry.
What it costs in Palm Springs
Hurricane-proof front and entry door installation in Palm Springs typically runs $840 to $1,420 for standard sizes and $1,180 to $1,780 for oversized or decorative-lite units with impact glazing.
How we do it
We specify the door and frame assembly to the exact Palm Beach County wind-load zone, pull the permit, install with reinforced hinges and multi-point locking, and schedule inspection to verify the Florida Product Approval label matches the permit documents.
What Door Installation Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Entry Door (Fiberglass Impact-Rated) | $680 - $1,240 |
| Hurricane-Proof Front Door | $840 - $1,780 |
| Frame modification for CBS wall (if needed) | $180 - $340 |
Do I need a permit to replace my front door in Palm Springs?
Yes. Palm Beach County requires a building permit for any exterior door replacement, and the installed unit must carry a current Florida Product Approval. We pull the permit and schedule inspection. Call (772) 362-5402 for a written quote including permit costs.
Can you match my door to the original mid-century style?
Yes. Therma-Tru and CGI offer period-appropriate panel profiles and lite configurations that satisfy impact requirements without the modern industrial appearance. We specify from the measured survey and provide a photo record of the finished installation. Call (772) 362-5402 to review options.
Energy-Efficient Windows in Palm Springs
Energy-efficient window installation in Palm Springs targets the thermal performance gap in original jalousie and single-track aluminum windows, which have no insulating value and allow conditioned air to escape through failed seals and non-thermal frames. With summer cooling loads running continuously from April through October, Palm Springs homeowners see the fastest payback from low-E coated, argon-filled impact units that reduce solar heat gain without sacrificing the hurricane protection insurers now require. Our Energy-Efficient Windows specify U-factor and SHGC ratings from the measured survey, matched to your home’s orientation and shading conditions.
Low-E & Argon Gas Glass
Signs you need it
Your west- and south-facing rooms overheat by mid-afternoon, your cooling bill spikes in summer, or you can feel radiant heat through the glass of existing windows.
What it costs in Palm Springs
Low-E and argon gas glass upgrade in Palm Springs typically adds $60 to $120 per opening to the base impact window price, with whole-unit installation running $540 to $1,060 for standard sizes.
How we do it
We measure each opening’s solar orientation, specify the appropriate low-E coating and argon fill level, install the insulated glass unit in the impact-rated frame, and document the glazing label and sightline alignment in your photo record.
ENERGY STAR Replacement Windows
Signs you need it
You want verified performance data for tax credit eligibility, your utility offers rebates for ENERGY STAR-certified fenestration, or you need documented U-factor and SHGC values for a green building certification.
What it costs in Palm Springs
ENERGY STAR replacement window installation in Palm Springs typically runs $620 to $1,180 per opening for certified impact-rated vinyl units and $860 to $1,520 for composite or aluminum-clad frames.
How we do it
We verify the NFRC label and ENERGY STAR climate zone certification, specify the unit from our measured survey, install with continuous insulation at the frame perimeter, and provide the certification documentation for your rebate or credit filing.
What Energy-Efficient Windows Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Low-E/Argon Upgrade (add to base window) | $60 - $120 |
| ENERGY STAR Impact Window (Vinyl) | $620 - $1,180 |
| ENERGY STAR Impact Window (Composite/Clad) | $860 - $1,520 |
Will energy-efficient windows lower my electric bill in Palm Springs?
Most Palm Springs homeowners see measurable cooling load reduction, particularly on west-facing walls where solar heat gain peaks. The exact savings depend on existing condition, home orientation, and shading. Call (772) 362-5402 for a measured survey and written estimate with performance specifications.
Do energy-efficient windows still protect against hurricanes?
Yes. Every energy-efficient unit we specify is also impact-rated to Florida Product Approval standards; the low-E coating and argon fill are added to laminated impact glass, not substituted for it. Call (772) 362-5402 to review the glazing specifications for your openings.
Impact Garage Doors in Palm Springs
Impact garage door installation in Palm Springs addresses a critical vulnerability in CBS homes where the garage door is often the largest unprotected opening and the most likely failure point in a wind event. Original flat-panel or thin-gauge steel doors from the 1960s-70s offer no wind-load resistance and are frequently excluded from insurer coverage unless replaced with Florida Building Code-compliant impact-rated systems. Our Impact Garage Doors specify wind-load-rated panels, reinforced tracks, and heavy-duty hardware from the measured survey of your existing opening, with the written price fixed before work starts.
Hurricane-Rated Garage Doors
Signs you need it
Your insurer has flagged the garage door as a non-compliant opening, your current door is a thin-gauge steel or wood panel with no wind-load rating, or you want to eliminate the need for storm panels on your largest opening.
What it costs in Palm Springs
Hurricane-rated garage door installation in Palm Springs typically runs $1,280 to $2,240 for single-car openings and $1,840 to $3,200 for double-car doors with impact-rated glazing sections.
How we do it
We measure the rough opening and headroom, specify the wind-load rating for your Palm Beach County zone, install reinforced tracks with heavy-duty brackets and tamper-resistant fasteners, and verify spring balance and auto-reverse function before inspection.
Wind-Load Code Compliance
Signs you need it
You are selling the home and the buyer’s inspection flagged the garage door, you need to bring a permitted addition into compliance, or your wind mitigation inspection requires documentation of the garage door rating.
What it costs in Palm Springs
Wind-load code compliance garage door installation in Palm Springs typically runs $1,420 to $2,480 for standard single-car retrofits and $2,080 to $3,560 for double-car or custom-height openings requiring structural header reinforcement.
How we do it
We verify the existing header and jamb framing against the engineered load path, specify the door and track system to the required wind-load pressure, pull the permit, and schedule Palm Beach County inspection with the Florida Product Approval documentation.
What Impact Garage Doors Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Hurricane-Rated Single-Car Door | $1,280 - $2,240 |
| Hurricane-Rated Double-Car Door | $1,840 - $3,200 |
| Wind-Load Compliance Retrofit (with header work) | $2,080 - $3,560 |
Does my garage door need to be impact-rated in Palm Springs?
If you are replacing the door under permit, yes. Palm Beach County requires Florida Product Approval-rated garage doors on all permitted replacements in the high-velocity wind zone. We specify, permit, and inspect to this standard. Call (772) 362-5402 for a measured survey and written quote.
Can you install an impact garage door on my existing track?
No. Hurricane-rated doors require reinforced tracks, heavy-duty brackets, and often additional headroom or backroom that original 1960s-70s installations do not provide. We measure the complete opening and specify the full system. Call (772) 362-5402 to review your existing conditions.
Custom & Geometric Windows in Palm Springs
Custom and geometric window installation in Palm Springs solves the problem of preserving or replicating distinctive architectural features in mid-century CBS homes where original shaped openings, arched transoms, or oversized picture windows are part of the structure’s character. Jalousie banks, corner windows, and geometric accent units are common in the 1950s-60s stock, and replacing them with standard rectangular units destroys both aesthetics and, often, structural integrity. Our Custom & Geometric Windows specify made-to-order impact-rated units from ViewLux or PGT, measured to the exact sightline and radius of your existing opening, with the written price fixed before fabrication begins.
Geometric & Shaped Windows
Signs you need it
You have triangular, trapezoid, or polygonal windows that are leaking or fogged, your insurer requires impact replacement but standard rectangles will not fit, or you are restoring a mid-century facade and need to match original sightlines.
What it costs in Palm Springs
Geometric and shaped window installation in Palm Springs typically runs $720 to $1,480 per opening for standard polygons and $1,080 to $2,240 for complex multi-angle or compound-radius units.
How we do it
We template the exact angle and sightline of the existing opening, specify the custom impact-rated frame and laminated glazing from ViewLux or PGT, fabricate to measured dimensions, and install with the same anchor and seal protocol as standard units.
Arched & Curved Windows
Signs you need it
Your arched transom or radius-top window has failed seals or cracked glazing, the original wood or aluminum frame has rotted or corroded, or you need to maintain the architectural character of a 1950s-60s Palm Springs facade.
What it costs in Palm Springs
Arched and curved window installation in Palm Springs typically runs $980 to $1,840 for half-round or quarter-round units and $1,420 to $2,680 for full custom-radius or elliptical openings.
How we do it
We measure the exact radius, springline, and frame depth, specify the curved impact-rated unit with matching grid or SDL pattern if present, fabricate with tempered and laminated glazing, and install with custom flashing to maintain the water management integrity of the CBS wall.
What Custom & Geometric Windows Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Geometric/Shaped Window (Standard Polygon) | $720 - $1,480 |
| Geometric/Shaped Window (Complex/Compound) | $1,080 - $2,240 |
| Arched/Curved Window (Half/Quarter Round) | $980 - $1,840 |
How long does custom window fabrication take?
Custom geometric and arched units typically require 4 to 6 weeks from measured survey to delivery, depending on complexity and current manufacturer queue. We do not start fabrication until you approve the written quote and template. Call (772) 362-5402 to schedule survey and review timeline.
Can you match the grid pattern on my original windows?
Yes. ViewLux and PGT offer custom SDL and GDL grid patterns that replicate mid-century sightlines, and we template the existing pattern during the measured survey. The match is documented in your photo record. Call (772) 362-5402 to review pattern options.
Brands We Service in Palm Springs
We specify, measure, and install PGT, CGI, Therma-Tru, and ViewLux products in Palm Springs, with parts and hardware stocked for common repair and adjustment scenarios. Most non-custom orders ship within 10 to 14 business days from our Miami coordination office. See our brands for full performance tier and warranty documentation.
Pricing for Windows & Doors in Palm Springs, FL
| Service | Typical range in Palm Springs |
|---|---|
| Single/Double Hung Impact Window | $480 - $1,340 |
| Horizontal Roller Impact Window | $520 - $1,420 |
| Entry Door (Fiberglass Impact-Rated) | $680 - $1,240 |
| Hurricane-Proof Front Door | $840 - $1,780 |
| Low-E/Argon Upgrade (add to base) | $60 - $120 |
| ENERGY STAR Impact Window (Vinyl) | $620 - $1,180 |
| ENERGY STAR Impact Window (Composite/Clad) | $860 - $1,520 |
| Hurricane-Rated Single-Car Garage Door | $1,280 - $2,240 |
| Hurricane-Rated Double-Car Garage Door | $1,840 - $3,200 |
| Geometric/Shaped Window (Standard) | $720 - $1,480 |
| Arched/Curved Window (Half/Quarter Round) | $980 - $1,840 |
Prices in Palm Springs trend toward the higher end when existing jalousie or single-track aluminum frames require full removal and CBS rough-opening repair, or when Palm Beach County inspection reveals the need for additional anchorage. The written quote from your measured survey is the final invoice; Haven Clause 1 means no change orders, no surprises.
Neighborhoods We Serve in Palm Springs
We work across Palm Springs’s full residential core, from the original 1950s CBS blocks near the village center to the 1960s-70s infill and rental conversions toward the western edge. Crews are dispatched from our Miami coordination office and typically arrive within standard Palm Beach County response times.
- Original village core (1950s CBS, jalousie-dominant)
- Mid-century infill blocks (1960s-70s aluminum sliders)
- Western rental conversion corridors
- Near-Lake Worth Road corridor
- South Palm Springs courtyard homes
Service Area - Cities Near Palm Springs
We install and replace windows and doors throughout central Palm Beach County, with measured surveys and written quotes available in Jupiter, FL, Tequesta, FL, Palm Beach Gardens, FL, and Jupiter Farms, FL. Scheduling and permitting are coordinated from our Miami office; crews serve each city locally with the same Haven Standard documentation and 365-Day Done Right Promise.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Palm Springs
We schedule measured surveys within 48 hours of contact and can often pull permits and begin installation before your insurer’s deadline, provided the opening specifications are standard and in stock. Call (772) 362-5402 with your notice date and we will map the timeline.
Most Palm Springs neighborhoods do not have active HOAs, but we verify association requirements before permitting if your property is subject to architectural review. The permit application includes all Florida Product Approval documentation typically required. Call (772) 362-5402 to confirm your specific situation.
We inspect the rough opening during the measured survey and document any visible conditions, but concealed damage to concrete block or anchor embedment is only visible after removal. If repair is needed, we photograph the condition, quote the additional work in writing before proceeding, and include it in your documented photo record. Haven Clause 5: no surprises.
Call (772) 362-5402 to schedule your free measured survey and written estimate. Every Palm Springs job starts with the document you keep and ends with the photo record we leave.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Springs Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.