Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lake Park, FL
Window and door installation in Lake Park typically runs $800-$3,200 per opening depending on product tier, with most CBS homes from the 1940s-1960s requiring rough-opening modification before any impact-rated unit can go in. We’re Sightline Windows & Doors, and we measure every opening to the sixteenth under the Haven Standard - the written price you receive is the same document our crew uses to cut the buck frame and set the sill pan. Call (772) 362-5402 to schedule your free measured survey; you’ll keep the document whether we do the job or not.
Why Lake Park Homes Are Different
Lake Park’s original incorporation as Kelsey City in 1923 left a dense core of concrete block homes built between roughly 1940 and 1965, most still carrying jalousie louvers or narrow-frame aluminum sliders sized to dimensions no modern impact window matches. In the rental-heavy blocks near Federal Highway and 10th Street, we regularly find sills corroded through from decades of salt spray off the Lake Worth Lagoon, sometimes an eighth of a mile from the water.
The combination is specific to this town: Palm Beach County mandates wind-borne debris protection on any replacement, yet the original rough openings - often three or four separate jalousie units spanning one wall - were framed to widths that standard impact inventory doesn’t cover. Installers who quote from a truck stock without measuring typically discover mid-job that buck framing or header modification is required. We see the same pattern in the CBS homes near Park Avenue and in the older rental courts off Old Dixie Highway, where deferred maintenance has left frames rotted at the sill entirely.
The salt-air corrosion is more aggressive here than in communities even two or three miles inland. Aluminum frames, steel door hardware, and galvanized sill pans all degrade faster within a few blocks of the Intracoastal, which is why we specify stainless or bronze hardware and composite sill pans as standard on Lake Park jobs, not upgrades.
Our Main Lake Park Services
Most Lake Park homeowners who call us start with one of two needs: replacing original jalousie or aluminum-frame windows with impact-rated units, or upgrading entry doors to meet the same code. These three pages detail our most-requested services in your area.
Window Replacement in Lake Park
We replace original jalousie, awning, and narrow-frame aluminum windows in Lake Park’s CBS homes with impact-rated units from PGT, CGI, and CWS, measured to the existing rough opening or modified when the original framing doesn’t match modern standards. Every job includes corrosion remediation at the sill, composite sill-pan installation, and a documented photo record. Window Replacement in Lake Park covers our full process for single-hung, horizontal roller, and custom configurations.
Impact Windows & Doors in Lake Park
Palm Beach County’s wind-borne debris code applies to every window and door replacement in Lake Park, not just new construction. We specify impact-rated products by design pressure rating and missile-impact certification, not by brand name alone, and we pull the permit and schedule inspection as part of the written scope. Impact Windows & Doors in Lake Park explains DP ratings, HVHZ compliance, and what the county inspector will check.
Sliding & Patio Doors in Lake Park
Lake Park’s older homes often have 6-foot or 8-foot sliding glass doors with corroded rollers and failed weatherstripping, installed before impact requirements existed. We replace these with multi-panel or 3-lite roller systems from PGT and CWS, with stainless steel rollers and reinforced interlocks rated for the salt-air environment. Sliding & Patio Doors in Lake Park details track replacement, header reinforcement, and hardware specifications.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Lake Park
Window installation in Lake Park begins with a reality we encounter on nearly every measured survey: the original jalousie or narrow-frame aluminum opening was built to a width and height that no standard impact window inventory covers, so the quote must account for buck framing or rough-opening rebuild before the unit is ordered. We perform this work under the Haven Standard - the written price includes all framing modification, corrosion remediation, permit pulling, and inspection scheduling, with no change orders once the document is signed. Our Window Installation hub explains the full measurement protocol and product tiers.
Single & Double Hung Windows
Signs you need it
Original jalousie or awning units no longer seal against wind-driven rain, or you’ve received a notice of violation from Palm Beach County regarding non-impact protection.
What it costs in Lake Park
Single or double hung impact window installation in Lake Park typically ranges from $1,200-$2,400 per opening, with buck framing or sill replacement adding $200-$600 where corrosion has compromised the substrate.
How we do it
We measure the rough opening to the sixteenth, fabricate composite buck frames on-site when needed, set the unit on a composite sill pan with end dams, and seal with backer rod and silicone before the county inspection.
Horizontal Roller Windows
Signs you need it
Sliding sashes stick or derail, weatherstripping is brittle or missing, or the original narrow-frame slider provides no impact protection and fails county replacement code.
What it costs in Lake Park
Horizontal roller impact window installation in Lake Park typically ranges from $1,400-$2,800 per opening, with multi-panel configurations or header reinforcement for wider spans at the upper end.
How we do it
We verify the track width against the specified unit, reinforce or replace the header when the original framing won’t carry the design load, install stainless steel rollers and interlocks, and document the glazing pocket clearance before sealing.
What Window Installation Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Single/Double Hung Impact Window | $1,200 - $2,400 |
| Horizontal Roller Impact Window | $1,400 - $2,800 |
| Buck Framing / Sill Replacement (per opening) | $200 - $600 |
Do you pull permits for window replacement in Lake Park?
Yes - Palm Beach County requires a building permit for any window replacement that changes the unit’s structural or impact rating, and we pull and schedule inspection as standard under Haven Clause 1; the permit cost is itemized in your written quote, not added later. Call (772) 362-5402 to review the permit timeline for your property.
How long does window installation take in Lake Park?
Most single-opening replacements with standard framing take one day; jobs requiring buck framing, header modification, or multiple jalousie-to-single-unit conversions typically run two to three days, with inspection scheduled after final seal. Call (772) 362-5402 for a timeline based on your measured survey.
Door Installation in Lake Park
Door installation in Lake Park confronts the same salt-air corrosion and non-code-original conditions as window work: original entry doors on 1940s-1960s CBS homes often sit in steel frames rusted at the threshold, with hardware that hasn’t been available for decades. We replace these with impact-rated entry systems from Therma-Tru and PGT, measured to the existing masonry opening or modified when the original frame size doesn’t match current stock, with every step documented under the Haven Standard. Our Door Installation hub details jamb types, threshold configurations, and hardware grades.
Entry Doors
Signs you need it
The steel jamb is rusted at the threshold, the door no longer seals against wind-driven rain, or the original unit provides no impact protection and fails Palm Beach County replacement code.
What it costs in Lake Park
Entry door installation in Lake Park typically ranges from $2,200-$4,800 including impact-rated slab, frame, and hardware, with jamb modification or threshold rebuild adding $300-$800 where corrosion has compromised the substrate.
How we do it
We remove the existing unit and assess the masonry opening for corrosion, fabricate a composite or aluminum jamb to fit, set the pre-hung door on a composite threshold with end dams, and install multi-point locking hardware before scheduling county inspection.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance carrier or HOA has required documented impact protection, or you’re replacing a decorative glass door with a design-pressure-rated system that meets HVHZ standards.
What it costs in Lake Park
Hurricane-rated entry door installation in Lake Park typically ranges from $2,800-$5,400 for DP-50 or higher systems with laminated glass and reinforced frames, with custom sizing or sidelite configurations at the upper end.
How we do it
We specify the design pressure rating and missile-impact certification required for your exposure category, order the unit to measured dimensions, and install with continuous hinge reinforcement and three-point locking before documentation and inspection.
What Door Installation Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Entry Door (impact-rated, standard size) | $2,200 - $4,800 |
| Hurricane-Rated Entry Door (DP-50+) | $2,800 - $5,400 |
| Jamb Modification / Threshold Rebuild | $300 - $800 |
Do you replace rusted steel door frames in Lake Park?
Yes - we remove corroded steel jambs and thresholds as standard, replacing with composite or aluminum components that won’t degrade in the salt-air environment; the scope and cost are fixed in the written quote before work begins. Call (772) 362-5402 to schedule a measured survey of your entry.
Can I keep my existing door size if it’s non-standard?
Non-standard sizes are common in Lake Park’s older homes and require custom-order units from Therma-Tru or PGT; we measure to the sixteenth and quote the exact lead time, typically 4-6 weeks for custom sizing versus 1-2 weeks for standard stock. Call (772) 362-5402 to confirm availability for your opening.
Energy-Efficient Windows in Lake Park
Energy-efficient window installation in Lake Park addresses a specific failure mode of the town’s original housing stock: jalousie and uninsulated aluminum-frame units conduct heat directly into the conditioned space, and their lack of weatherstripping forces air conditioning systems to compensate for continuous infiltration. We specify low-E coatings, argon gas fill, and thermally broken frames from PGT and ECO Window Systems, measured to openings that often require modification to accept modern insulated units. Our Energy-Efficient Windows hub breaks down U-factor, SHGC, and visible transmittance by exposure.
Low-E & Argon Gas Glass
Signs you need it
Your east- or west-facing rooms overheat by mid-morning, or your energy bills spike in summer despite the air conditioner running continuously.
What it costs in Lake Park
Low-E with argon gas fill in Lake Park typically adds $80-$180 per opening to the base impact-window price, with hard-coat low-E on south-facing exposures and soft-coat on north-facing per manufacturer spec.
How we do it
We specify the low-E coating location and argon fill percentage by orientation and climate zone, order the insulated glass unit from the manufacturer, and verify the seal and spacer type at delivery before installation.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows as part of a renovation or energy improvement, and you want documented performance data for rebate or resale purposes.
What it costs in Lake Park
ENERGY STAR certified impact window installation in Lake Park typically ranges from $1,400-$2,900 per opening, with the certification label and performance documentation included in the job file.
How we do it
We select products from the ENERGY STAR Most Efficient list for South Florida climate zone, verify the NFRC label ratings at delivery, and include the documentation in your Haven Standard job file for rebate or inspection purposes.
What Energy-Efficient Windows Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Low-E / Argon Upgrade (per opening) | +$80 - $180 |
| ENERGY STAR Impact Window | $1,400 - $2,900 |
| Thermally Broken Frame Upgrade | +$120 - $250 |
Will energy-efficient windows lower my cooling costs in Lake Park?
Yes - we typically see SHGC reduction from 0.60+ on original aluminum frames to 0.25 or below on low-E units, which translates to measurable load reduction on east and west exposures where the sun is most direct. Call (772) 362-5402 for a performance estimate based on your home’s orientation and current units.
Do energy-efficient windows still meet hurricane code?
All energy-efficient windows we install in Lake Park are also impact-rated to Palm Beach County wind-borne debris requirements; the low-E coating and argon fill are added to an already code-compliant laminated or insulated laminated unit, not substituted for it. Call (772) 362-5402 to review the specific product certifications.
Impact Garage Doors in Lake Park
Impact garage door installation in Lake Park is often the last component homeowners address, but it’s frequently the largest unprotected opening on the home and the one most vulnerable to wind-borne debris during a storm event. Original garage doors in the town’s 1940s-1960s CBS homes are typically non-rated, single-layer steel or wood panels with no reinforcement, and the salt-air environment has often corroded the track and spring hardware beyond safe operation. Our Impact Garage Doors hub covers wind-load ratings, track reinforcement, and opener compatibility.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the panels flex visibly in moderate winds, or your insurance inspection noted the opening as unprotected.
What it costs in Lake Park
Hurricane-rated garage door installation in Lake Park typically ranges from $2,800-$5,500 for a standard two-car opening, with wind-load ratings from W-6 to W-9 depending on exposure and home structure height.
How we do it
We calculate the required wind-load rating from your home’s mean roof height and exposure category, specify the door and track reinforcement from Mr-Glass or ViewLux, and install with heavy-duty hinges and struts before scheduling inspection.
Garage Door Replacement
Signs you need it
The door is dented, the track is rusted or misaligned, the springs are fatigued, or the opener strains to lift the panel - all common in Lake Park’s salt-air environment.
What it costs in Lake Park
Full garage door replacement in Lake Park typically ranges from $1,800-$4,200 for non-impact units or $2,800-$5,500 for impact-rated systems, with opener replacement and track hardware additional.
How we do it
We remove the existing door and hardware, assess the header and jambs for corrosion, install new track and spring hardware rated for the door weight, and balance the system before testing opener force settings and documenting the installation.
What Impact Garage Doors Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Hurricane-Rated Garage Door (2-car) | $2,800 - $5,500 |
| Standard Garage Door Replacement | $1,800 - $4,200 |
| Opener & Hardware Replacement | $400 - $900 |
Do I need a permit to replace my garage door in Lake Park?
Yes - Palm Beach County requires a building permit for any garage door replacement that changes the wind-load rating or structural attachment, and we pull the permit and schedule inspection as standard under Haven Clause 1. Call (772) 362-5402 to confirm the required rating for your home’s exposure category.
Can you reuse my garage door opener with a new impact door?
Sometimes - we test the existing opener for force and travel limits, but impact-rated doors are heavier than original non-rated panels and often require a higher-horsepower unit with battery backup; we note this in the written quote before ordering. Call (772) 362-5402 to schedule an assessment of your current system.
Custom & Geometric Windows in Lake Park
Custom and geometric window installation in Lake Park solves a problem specific to the town’s architectural character: the 1940s-1960s CBS homes often feature arched or shaped openings, grouped jalousie banks, or oversized picture windows that were custom-built for the original construction and have no modern stock equivalent. We fabricate custom impact-rated units from PGT and ViewLux to measured dimensions, with geometric shapes, divided lites, or custom grid patterns as specified. Our Custom & Geometric Windows hub details the templating process and lead times.
Geometric & Shaped Windows
Signs you need it
You have an arched, circular, or trapezoidal opening that currently holds a fixed non-impact unit or is boarded over, and you want documented impact protection without altering the original architectural shape.
What it costs in Lake Park
Geometric impact window installation in Lake Park typically ranges from $1,800-$4,200 per opening, with templating, custom fabrication, and specialized installation labor included in the written quote.
How we do it
We create a physical template of the existing opening, transmit it to the manufacturer for CAD verification, receive the custom unit with impact certification, and install with custom flashing and sealant profiles matched to the shape.
Custom Impact Windows
Signs you need it
Your original window grouping - three or four narrow jalousie units in one framed opening, for example - needs to be replaced with a single custom-width impact unit that matches the exterior aesthetic.
What it costs in Lake Park
Custom-width impact window installation in Lake Park typically ranges from $2,200-$5,400 per opening, with the width and height driving fabrication cost more than grid or finish options.
How we do it
We measure the full rough opening including intermediate framing, design the replacement unit to maintain sightlines and exterior proportions, fabricate to order with impact certification, and modify the opening as needed before installation and inspection.
What Custom & Geometric Windows Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Geometric / Shaped Impact Window | $1,800 - $4,200 |
| Custom-Width Impact Window | $2,200 - $5,400 |
| Oversized Opening (per sq ft over standard) | $45 - $85 |
How long does custom window fabrication take?
Custom geometric and shaped units from PGT and ViewLux typically require 6-10 weeks from template approval to delivery, versus 1-3 weeks for standard stock; we include the confirmed lead time in your written quote and coordinate installation once the unit arrives. Call (772) 362-5402 to start the templating process.
Can you match the original grid pattern on my custom window?
Yes - we document the existing sightlines and muntin configuration during the measured survey, and specify the grid pattern, profile width, and finish to match or update as you prefer; the documentation travels with the order to the manufacturer. Call (772) 362-5402 to review grid options for your opening.
Brands We Service in Lake Park
We install and service eight verified manufacturer lines in Lake Park: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Each is specified by performance tier and price range for the opening requirements, not by inventory availability. We stock common hardware and weatherstripping components locally for faster turnaround on service calls. See our brands for full specifications and warranty terms.
Pricing for Windows & Doors in Lake Park, FL
| Service | Typical range in Lake Park |
|---|---|
| Single/Double Hung Impact Window | $1,200 - $2,400 |
| Horizontal Roller Impact Window | $1,400 - $2,800 |
| Entry Door (impact-rated) | $2,200 - $4,800 |
| Hurricane-Rated Entry Door (DP-50+) | $2,800 - $5,400 |
| Low-E / Argon Upgrade | +$80 - $180 per opening |
| ENERGY STAR Impact Window | $1,400 - $2,900 |
| Hurricane-Rated Garage Door (2-car) | $2,800 - $5,500 |
| Standard Garage Door Replacement | $1,800 - $4,200 |
| Geometric / Shaped Impact Window | $1,800 - $4,200 |
| Custom-Width Impact Window | $2,200 - $5,400 |
| Buck Framing / Sill Replacement | $200 - $600 per opening |
| Jamb Modification / Threshold Rebuild | $300 - $800 |
Prices in Lake Park run higher than inland markets primarily due to rough-opening modification on 1940s-1960s homes and the salt-air specification of stainless or bronze hardware and composite sill pans. Under Haven Clause 1, the written price you receive after our measured survey is the same document our crew works from - no change orders, no surprises.
Neighborhoods We Serve in Lake Park
We work throughout Lake Park’s original incorporated area and surrounding unincorporated pockets, with crews dispatched from our South Florida coordination office and scheduled to minimize travel time across the Palm Beach County corridor.
- Kelsey City Historic District
- Park Avenue corridor
- Federal Highway rental blocks
- Old Dixie Highway corridor
- 10th Street and Lagoon-adjacent streets
Most Lake Park properties can be surveyed within 48 hours of contact, with installation scheduled once product is available and permits are approved.
Service Area - Cities Near Lake Park
Our crews serve the northern Palm Beach County corridor from the same South Florida dispatch base, with regular work in Jupiter, FL, Tequesta, FL, Palm Beach Gardens, FL, and Jupiter Farms, FL. Each market has distinct housing stock and code requirements; we do not paste the same scope across city lines.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lake Park
Yes - Palm Beach County requires a building permit for any window replacement that changes the impact rating or structural attachment, which includes virtually every replacement in Lake Park’s non-impact original housing stock. We pull the permit, schedule inspection, and include both costs in your written quote under Haven Clause 1.
Clear furniture and window treatments from the work area, ensure access to the exterior for scaffolding or ladders, and notify your HOA if applicable; we handle all utility notifications, protection of adjacent surfaces, and jobsite cleanup. The measured survey document we leave with you details any additional preparation specific to your opening conditions.
Yes - we work directly with property owners and managers on Lake Park’s rental-heavy blocks, providing the same written quote, documented photo record, and 365-Day Done Right Promise; we coordinate tenant access and schedule to minimize disruption. Call (772) 362-5402 to discuss portfolio pricing for multiple units.
Call (772) 362-5402 to schedule your free measured survey. You’ll keep the document, and the written price will not change once it’s set.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Park Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C.