Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lake Worth, FL
Window installation in Lake Worth runs $650-$1,400 per opening for impact-rated vinyl or aluminum units, with most CBS bungalows needing custom sizing due to non-standard masonry rough openings from the 1940s-1970s build era. Salt-air corrosion off the Lake Worth Lagoon destroys original jalousie and single-pane aluminum frames faster than inland Palm Beach County, so replacement here is as much about corrosion failure as it is about code compliance. Call (772) 362-5402 and we’ll schedule a measured survey you keep, with the written price before any work starts.
Why Lake Worth Homes Are Different
Lake Worth sits directly alongside the Lake Worth Lagoon with the Atlantic less than a mile east, meaning salt-air corrosion hammers homes across the entire city, not just oceanfront lots. This accelerates failure of the original jalousie and aluminum single-pane windows packed into the city’s large inventory of 1940s-1970s CBS bungalows. Every replacement project here is a dual-driver job: corrosion-induced failure on aging mid-century stock plus mandatory Palm Beach County impact-rated compliance, a combination far more concentrated in Lake Worth than inland county cities like Wellington or Greenacres.
The fixed masonry rough openings in these homes are often non-standard dimensions, requiring custom sizing or wood-buck framing inserts when retrofitting modern impact units. When pulling jalousie frames out of 1950s-60s CBS walls in Lake Worth’s older blocks, the corroded aluminum tracks have frequently oxidized and bonded into the surrounding block mortar. What looks like a straightforward swap routinely becomes a masonry patching job once the frame is extracted, a hidden cost we quote for upfront under Haven Clause 1.
Our Main Lake Worth Services
Most Lake Worth calls start with one of these three projects.
Window Replacement in Lake Worth
We replace corroded jalousie and single-pane aluminum units in CBS bungalows with impact-rated vinyl or aluminum frames sized to non-standard masonry openings. Salt-air degradation off the lagoon means frames that test structurally sound often crumble during removal. Window Replacement in Lake Worth covers full-frame tearout, wood-buck inserts where needed, and Palm Beach County wind-borne debris compliance documentation.
Impact Windows & Doors in Lake Worth
Palm Beach County’s wind-borne debris region designation requires all new window and door installations to be impact-rated or paired with compliant storm shutters, with no exceptions for interior or courtyard-facing openings. We specify PGT, CGI, and CWS product lines by performance tier and opening requirements, not by margin. Impact Windows & Doors in Lake Worth includes permit-ready engineering documentation and inspection scheduling.
Sliding & Patio Doors in Lake Worth
Original sliding glass doors in Lake Worth’s mid-century stock suffer track corrosion and seal failure from salt-air saturation, with many units predating modern impact standards. We measure the rough opening, specify the replacement from eight manufacturer lines, and install with verified crews identified by license number before arrival. Sliding & Patio Doors in Lake Worth covers 2-panel through 4-panel configurations with written pricing from the measured survey.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Lake Worth
Window installation in Lake Worth addresses the dual reality of salt-air corrosion on mid-century aluminum and jalousie frames plus mandatory impact-rated compliance under Palm Beach County code. The city’s 1940s-1970s CBS bungalows present non-standard masonry rough openings that demand custom sizing or wood-buck framing inserts, making measurement accuracy the critical first step. Window Installation at Sightline begins with a survey document the customer keeps, and the written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
Original aluminum frames show white oxidation pitting, sashes stick or drop, or the balance system no longer holds position in the jamb.
What it costs in Lake Worth
Impact-rated vinyl single or double hung windows in Lake Worth typically run $650-$980 per opening installed, with wood-buck framing for non-standard block openings adding $180-$340.
How we do it
We measure the masonry rough opening to the sixteenth, fabricate the unit to that dimension or specify a wood-buck insert, remove the existing frame with masonry patching as needed, install, seal, and photograph the completed opening for the documented photo record.
Horizontal Roller Windows
Signs you need it
Roller wheels grind or seize, the sash tilts in the track, or the weep holes are clogged with salt corrosion preventing drainage.
What it costs in Lake Worth
Impact-rated horizontal roller windows in Lake Worth range $720-$1,150 per opening installed, with oversize living-room configurations toward the upper end.
How we do it
We verify the track width and sash travel distance, remove the corroded unit with attention to bonded aluminum in block mortar, install the replacement with new fasteners rated for masonry, test operation, and document with photos.
What Window Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Impact vinyl single/double hung | $650 - $980 per opening |
| Impact horizontal roller | $720 - $1,150 per opening |
| Wood-buck framing insert (non-standard opening) | $180 - $340 additional |
How long does window installation take in Lake Worth?
Most Lake Worth homes complete 8-12 openings in one day, though 1950s-60s CBS walls with corroded frames bonded to mortar may require additional masonry patching that extends the schedule. We quote that contingency upfront in the written scope, not as a change order. Call (772) 362-5402 for a measured survey and exact timeline.
Do you handle permits for window installation in Lake Worth?
Yes, we pull Palm Beach County permits for all impact-rated window installations and schedule inspections as required; the permit cost is itemized in the written quote you receive before work starts. Call (772) 362-5402 to schedule your free estimate.
Door Installation in Lake Worth
Door installation in Lake Worth replaces corroded original entry units and non-compliant sliding doors in 1940s-1970s CBS bungalows with impact-rated systems that meet Palm Beach County wind-borne debris requirements. Salt-air saturation off the Lake Worth Lagoon degrades hardware, corrodes thresholds, and destroys weatherstripping faster than inland locations, so door replacement here is often urgent rather than elective. Door Installation includes measured survey, written pricing, and documented photo record under the Haven Standard.
Hurricane-Proof Front & Entry Doors
Signs you need it
The door frame shows aluminum oxidation, the threshold is pitted or separating from the slab, or the deadbolt no longer seats flush due to frame shift.
What it costs in Lake Worth
Impact-rated fiberglass or steel entry door systems in Lake Worth range $1,800-$3,400 installed, with sidelite configurations and custom jamb widths toward the upper end.
How we do it
We measure the masonry opening and jamb depth, specify the door and frame system from Therma-Tru or ViewLux lines by performance requirement, remove the corroded unit with masonry patching as needed, install plumb and square, and test latching and sealing before photographing.
French & Double Doors
Signs you need it
Inactive panel gapping exceeds 1/8 inch, astragal seal is compressed or missing, or multipoint lock hardware is corroded and non-functional.
What it costs in Lake Worth
Impact-rated French or double door systems in Lake Worth typically run $2,400-$4,200 installed, with 6-foot and 8-foot configurations and transom options priced accordingly.
How we do it
We verify the rough opening width and header condition, specify the unit with proper astragal and multipoint hardware, install with shimming for operation, adjust both active and inactive panels, and document the completed assembly.
What Door Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Impact entry door (fiberglass/steel) | $1,800 - $3,400 installed |
| Impact French/double door system | $2,400 - $4,200 installed |
| Custom jamb width or masonry patching | $280 - $520 additional |
Can you match my existing door size in a 1950s Lake Worth home?
Yes, we fabricate custom jamb widths and specify units to fit non-standard masonry openings common in Lake Worth’s mid-century CBS stock, with the exact dimension noted on the measured survey you keep. Call (772) 362-5402 for a written quote.
Do French doors in Lake Worth need impact rating?
All exterior doors in Palm Beach County’s wind-borne debris region must be impact-rated or paired with compliant storm shutters, including courtyard-facing French doors with no direct Atlantic exposure. We specify and document compliance for inspection. Call (772) 362-5402 to review your opening.
Energy-Efficient Windows in Lake Worth
Energy-efficient windows in Lake Worth address the cooling load penalty from original single-pane jalousie and aluminum units in 1940s-1970s CBS bungalows, where unconditioned air infiltration and solar heat gain drive utility costs well above comparable inland homes. The combination of salt-air frame degradation and poor thermal performance makes replacement a measurable investment with documented return, not a cosmetic upgrade. Energy-Efficient Windows at Sightline specifies by U-factor, SHGC, and visible transmittance for each orientation, with the performance data written into the quote.
Low-E & Argon Gas Glass
Signs you need it
Rooms with west or south exposure exceed 78°F by mid-afternoon despite thermostat setting, or glass surfaces feel radiantly hot to the touch.
What it costs in Lake Worth
Low-E with argon gas fill in impact-rated vinyl framing runs $720-$1,050 per opening in Lake Worth, with spectrally selective coatings toward the upper end.
How we do it
We assess each opening’s orientation and shading, specify the appropriate low-E coating and argon fill by performance tier, install with warm-edge spacers, and provide the NFRC label documentation for the customer’s records.
Insulated Laminated Glass
Signs you need it
Street noise transmits clearly through existing single-pane glass, or the homeowner requires both impact protection and acoustic dampening near the Lake Worth Lagoon.
What it costs in Lake Worth
Insulated laminated glass units in impact-rated framing range $890-$1,340 per opening in Lake Worth, with thicker interlayers for enhanced sound control at the upper end.
How we do it
We measure for the increased unit weight, specify the laminated lite with appropriate interlayer thickness, reinforce hardware as needed, install with structural silicone glazing where specified, and test operation under load.
What Energy-Efficient Windows Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Low-E/argon impact vinyl window | $720 - $1,050 per opening |
| Insulated laminated glass unit | $890 - $1,340 per opening |
| Spectrally selective or enhanced coating upgrade | $120 - $240 per opening |
Will energy-efficient windows lower my cooling bill in Lake Worth?
Homeowners replacing single-pane jalousie or clear aluminum units typically see measurable cooling load reduction, with exact savings depending on orientation, shading, and existing HVAC efficiency; we document the U-factor and SHGC improvement in the written scope. Call (772) 362-5402 for a performance estimate specific to your home.
Do energy-efficient windows still meet impact requirements in Lake Worth?
Yes, all energy-efficient options we specify carry Miami-Dade and Palm Beach County impact ratings; the low-E coating and argon fill are added to laminated or tempered impact glass, not substituted for it. Call (772) 362-5402 to review the NFRC and impact documentation.
Impact Garage Doors in Lake Worth
Impact garage doors in Lake Worth protect the largest opening in most CBS bungalows, a critical vulnerability under Palm Beach County wind-borne debris code that original flat-panel or raised-panel wood doors cannot satisfy. Salt-air corrosion attacks track hardware, spring systems, and bottom seals with particular severity in garage environments where ventilation carries lagoon moisture directly into the structure. Impact Garage Doors includes wind-load engineering, permit documentation, and inspection scheduling as standard.
Hurricane-Rated Garage Doors
Signs you need it
The existing door lacks a Miami-Dade or Florida Product Approval number, the track is fastened with non-rated hardware, or the door bows visibly under moderate wind pressure.
What it costs in Lake Worth
Hurricane-rated steel or aluminum garage door systems in Lake Worth range $1,400-$2,800 installed for single-car openings, with wind-load ratings from 120 to 180 MPH priced accordingly.
How we do it
We measure the opening and assess the header and jambs for structural adequacy, specify the door and track system with the required wind-load rating, install with proper anchorage to masonry or wood framing, and provide the product approval documentation for permit closure.
Wind-Load Code Compliance
Signs you need it
A permit application for window or door replacement has been flagged for garage door non-compliance, or the existing door was installed before 2002 Florida Building Code adoption.
What it costs in Lake Worth
Wind-load compliance upgrades including new track, hardware, and door replacement in Lake Worth typically run $1,800-$3,200 for two-car openings with higher wind-load requirements.
How we do it
We verify the required wind-load rating for the specific Lake Worth address, engineer the system with appropriate track gauge and anchorage pattern, pull the permit, install, and schedule inspection with the documented photo record.
What Impact Garage Doors Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Hurricane-rated single-car door system | $1,400 - $2,800 installed |
| Wind-load compliance upgrade (two-car) | $1,800 - $3,200 installed |
| Structural header reinforcement if needed | $340 - $680 additional |
Does my garage door need impact rating if it’s not facing the ocean?
Palm Beach County’s wind-borne debris region designation applies to all structures regardless of orientation; interior courtyard and alley-facing garage doors require the same impact rating as oceanfront units, with no exemptions. Call (772) 362-5402 to verify your door’s compliance status.
Can you upgrade my garage door for wind-load without replacing the whole system?
In some cases we can retrofit wind-load hardware and reinforced track to an existing door if the panel itself is structurally adequate, though most pre-2002 doors in Lake Worth require full replacement to meet current code; we assess and quote both paths in writing. Call (772) 362-5402 for an inspection.
Custom & Geometric Windows in Lake Worth
Custom and geometric windows in Lake Worth solve the mismatch between modern impact-rated units and the non-standard masonry rough openings found throughout the city’s 1940s-1970s CBS bungalows, where original jalousie and fixed-lite configurations used dimensions no manufacturer stocks today. Arched, circular, and extended horizontal openings in historic east-side and downtown-adjacent neighborhoods demand fabrication to measured sightline dimensions, not field modification of standard units. Custom & Geometric Windows at Sightline produces the measured survey document first, with the quote tied to those exact dimensions.
Geometric & Shaped Windows
Signs you need it
The existing shaped opening contains fixed glass or jalousie louvers with no operable sash, or a previous replacement has covered the original arch with a rectangular unit and visible trim infill.
What it costs in Lake Worth
Custom geometric impact-rated windows in Lake Worth range $1,200-$2,400 per opening installed, with compound curves and true divided lite patterns toward the upper end.
How we do it
We template the exact radius or polygon with a physical pattern, fabricate the vinyl or aluminum frame to that template with integrated impact glazing, remove the existing unit with masonry preservation, install with integral flashing, and document the finished sightline.
Oversized Openings
Signs you need it
A living-room picture window exceeds 72 inches in either dimension with failed seal or corroded frame, or the opening was originally multiple units joined with mullions now failing.
What it costs in Lake Worth
Oversized custom impact-rated units in Lake Worth typically run $1,800-$3,600 installed, with structural reinforcement, tempered or laminated requirements, and lift equipment needs priced in the written scope.
How we do it
We assess the header span and structural adequacy, engineer the unit with appropriate reinforcement and glazing specification, crane or lift as needed for safe placement, install with structural anchorage, and photograph the completed assembly for the documented record.
What Custom & Geometric Windows Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Custom geometric impact window | $1,200 - $2,400 per opening |
| Oversized custom impact unit | $1,800 - $3,600 per opening |
| Structural header reinforcement or crane service | $420 - $890 additional |
Can you match the original arch in my 1950s Lake Worth bungalow?
Yes, we template the existing radius or ellipse and fabricate a replacement impact-rated unit to that exact profile, with the template and finished sightline documented in the photo record; we do not cover arches with rectangular units and trim infill. Call (772) 362-5402 to schedule templating.
How long do custom geometric windows take to fabricate?
Most custom geometric units fabricate in 4-6 weeks from template approval, with oversized or compound-curve units occasionally extending to 8 weeks; we include the production schedule in the written quote with no change orders for standard lead-time variation. Call (772) 362-5402 to start the measured survey.
Brands We Service in Lake Worth
We specify from eight manufacturer lines in Lake Worth: PGT and CGI for impact-rated performance tiers, CWS and ViewLux for energy-efficient and custom applications, with ES Windows, ECO Window Systems, Mr-Glass, and Therma-Tru rounding out the portfolio by opening requirement. Parts and hardware for common configurations are stocked locally through our Miami office, with most non-stock items arriving in 3-5 business days. See our brands for full performance specifications.
Pricing for Windows & Doors in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Impact vinyl single/double hung window | $650 - $980 per opening |
| Impact horizontal roller window | $720 - $1,150 per opening |
| Low-E/argon energy-efficient window | $720 - $1,050 per opening |
| Insulated laminated glass unit | $890 - $1,340 per opening |
| Impact entry door (fiberglass/steel) | $1,800 - $3,400 installed |
| Impact French/double door system | $2,400 - $4,200 installed |
| Hurricane-rated single-car garage door | $1,400 - $2,800 installed |
| Wind-load garage compliance (two-car) | $1,800 - $3,200 installed |
| Custom geometric impact window | $1,200 - $2,400 per opening |
| Oversized custom impact unit | $1,800 - $3,600 per opening |
Prices in Lake Worth push toward the upper end when corroded aluminum frames have bonded to block mortar requiring masonry patching, or when structural headers need reinforcement for oversized units. Haven Clause 1 means the measured survey and the written quote are the same document; the price on the page before work starts is the price on the final invoice.
Neighborhoods We Serve in Lake Worth
We work across Lake Worth’s full residential core, from historic east-side CBS bungalows to newer infill near the downtown corridor. Crews dispatch from our Miami office with scheduling coordinated for Palm Beach County routes; most Lake Worth appointments book within 3-5 business days of the initial call.
- Historic East Side
- Downtown-adjacent residential core
- South Palm Park
- College Park
- Parrot Cove
Service Area - Cities Near Lake Worth
Our crews serve the central Palm Beach County corridor including Greenacres, FL to the west, Royal Palm Beach, FL and West Palm Beach, FL to the north, and Palm Beach, FL across the Intracoastal. Every appointment carries the same Haven Standard: measured survey, written price, verified crew, and documented photo record.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lake Worth
Yes, Palm Beach County requires permits for all window and door replacements in the wind-borne debris region, with impact-rated product approval documentation and inspection sign-off; we pull permits and schedule inspections as standard, with costs itemized in the written quote.
Clear interior access to each opening and note any operation problems, corrosion, or moisture intrusion you’ve observed; we handle the exterior measurement, structural assessment, and product specification during the survey, which produces the document you keep.
We provide product approval documentation, finish samples, and installation details for HOA architectural review upon request; the written quote includes any HOA-mandated specifications so there are no surprises after approval.
Call (772) 362-5402 to schedule your free estimate. A live person answers, 24/7.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.