Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterPGT Impact Windows & Doors in Jupiter: What to Know First
As an independent PGT service provider in Jupiter, we install and service PGT impact windows and doors with written pricing before any work begins and a 365-Day Done Right Promise backed by the Haven Standard. Most PGT impact jobs in Jupiter run from $1,200 to $4,800 per opening installed, depending on series, glass package, and structural prep. We carry PGT’s full impact-rated catalog alongside CGI, CWS, ES Windows, and ECO Window Systems, so we specify by what your opening requires, not by what is in stock.
This page is for Jupiter homeowners who already own PGT products and need honest answers about repair, replacement, or upgrade to impact-rated units. Call (772) 362-5402 to schedule your free measured survey. The quote you receive is the document we work from.
How PGT Products Fail - and How We Fix Them
- WinGuard Aluminum single-hung sash drift. The WinGuard SH7700 series develops sash drop in Jupiter’s salt-laden coastal air when the balance shoe wears against the jamb liner. We see this most in homes east of U.S. 1 where the onshore flow accelerates corrosion. We replace the balance assembly with PGT-spec components, realign the sash, and document the frame plumb before we leave. If the jamb liner is grooved, we replace it rather than shim around it.
- WinGuard Vinyl horizontal roller hard-roll and seal compression. The SH5500 series rollers flat-spot over time, especially on west-facing openings that take afternoon thermal expansion. The sash becomes hard to move, and owners force it, deforming the interlock. We install PGT’s stainless roller set, check the sill track for the hairline cracks that precede water intrusion, and replace the pile weatherstrip if the backing has compressed below 3/16 inch.
- WinGuard Architectural Series corner-seal breach. The AW5500’s mitered corners rely on a dual-durometer seal that can relax in Jupiter’s UV load, particularly on second-story units where heat builds between the glass and the frame. We disassemble the corner, clean the old sealant with MEK, and re-bed with SikaFlex-252 or factory-equivalent, then pressure-test to 6.0 PSF to verify.
- PGT PremierVue laminated glass delamination at the edge. PremierVue’s thicker interlayer can separate from the lite if the edge block is missing or if the installer used non-PGT setting blocks that transmitted frame stress. We see this in retrofits where the original installer skipped the 1/4-inch clearance spec. We replace the IGU with PGT OEM glass, reset with proper edge clearances, and photograph the setting block placement for the customer’s file.
- WinGuard French door multi-point misalignment. The FD7500 series’ three-point lock can bind when the adjustable hinges settle in Jupiter’s sandy soils, particularly in Abacoa and Jupiter Farms where slab movement is common. We don’t just adjust the strike; we check the hinge-side frame for twist, shim the threshold if the sill has dropped, and cycle the lock fifty times before we sign off.
Our PGT Impact Windows & Doors Process
- 1
Measured survey. Sonia Raman or a Haven-certified tech records every rough opening to 1/16 inch, notes the existing PGT series from the etched mark in the glass corner, and photographs the frame condition. The customer keeps this survey.
- 2
Written scope and price. We specify PGT OEM or quality aftermarket parts by part number, name the glass package and U-factor, and state the installed price. Haven Clause 1: the measurement and the quote are the same document. No allowances.
- 3
Verified crew arrival. Background-checked, uniformed technicians, license numbers provided before arrival. Haven Clause 3. They bring the specified parts, not a truck stock guess.
- 4
Installation with evidence. We remove, install, seal, and test. Every step is photographed: the rough opening before, the flashing detail, the setting block placement, the final lock cycle. Haven Clause 4.
- 5
Final walk and documentation. The customer receives the photo record, the completed scope document, and the 365-Day Done Right Promise in writing. If the lock binds or the sash drifts, we make it right. Haven Clause 5.
- 6
Cleanup and close. We haul the old unit, vacuum the track, and leave the opening operable. The invoice matches the written price. No surprises.
Before
AfterWhat PGT Impact Windows & Doors Costs in Jupiter
| Scenario | Typical Range | What Moves the Price |
|---|---|---|
| PGT WinGuard Vinyl single-hung replacement, standard size | $1,200 - $1,900 | Glass package (clear vs. Low-E), frame depth, stucco repair extent |
| PGT WinGuard Aluminum single-hung, coastal exposure | $1,500 - $2,400 | Corrosion-resistant hardware upgrade, permit-required wind-load documentation |
| PGT WinGuard horizontal roller, large format (60×48 or greater) | $2,200 - $3,600 | Reinforced sill, impact-rated screen, structural header modification |
| PGT PremierVue fixed picture window, custom geometric | $2,800 - $4,800 | IGU thickness, custom shape cutting, crane or high-lift access |
| PGT French door, inswing or outswing, with multi-point | $3,500 - $5,500 | Panel count, threshold type, sidelight integration |
These are installed prices for Jupiter, including permit pulling when required. We do not quote over the phone without a measured survey. Bring us any competitor’s written estimate and we will review it at no charge. Call (772) 362-5402 for your free measured survey.
Why Jupiter Homeowners Call Sightline Windows & Doors Jupiter for PGT Work
We’ve installed and serviced PGT products along Jupiter’s Indiantown Road corridor since 2012, through Hurricane Matthew, Irma, and Nicole. That stretch taught us more about Florida wind-load specs than any classroom. When a PGT balance fails or a corner seal breaches, we know whether it’s a parts issue, an installation issue, or a specification issue, and we say so in writing.
Our 365-Day Done Right Promise is not a courtesy; it is Haven Clause 5, stamped on every job. Our techs are verified, uniformed, and identified by license number before they arrive. If PGT lead times extend, we can cross-specify from CGI, CWS, ES Windows, or ECO Window Systems from the same measured survey, matched to the same performance tier. Measure once, quote it straight, install it right - that’s the whole business.
Live phone coverage, 24/7. The person who answers can schedule your survey, not just take a message.
FAQs
No. PGT’s limited warranty covers manufacturing defects in the product itself, not who installs or services it. As an independent PGT service provider, we use PGT OEM parts and factory-specified procedures, so warranty claims remain valid for defects in materials or workmanship. We document every part number and installation detail so you have evidence if a claim arises. Call (772) 362-5402 with your PGT serial number and we will verify warranty status before we quote.
Standard PGT replacement parts - balances, rollers, locks, weatherstrip - typically arrive within 5 to 10 business days to our Palm Beach County warehouse. Custom IGU replacements or special-order sizes can extend to 3 to 4 weeks. We do not start work until the parts are in hand, because Haven Clause 1 requires a fixed price, and we cannot fix a price on a backorder. If your opening is compromised, we can board and seal temporarily while we wait.
Repair when the frame is sound and the failure is isolated to a component we can source and install to factory spec. Replace when the frame has corrosion, the IGU has failed, or the product is pre-2010 and parts are discontinued. In Jupiter’s coastal environment, we see aluminum frames east of A1A reach end-of-service life faster than inland vinyl units. We will show you the frame readings and recommend repair or replacement in writing, with both prices, so you decide from evidence.
Yes. We specify by performance tier, not by brand loyalty. CGI’s Estate Collection, CWS’s Aria series, and ES Windows’ impact line all publish DP ratings, U-factors, and SHGC values we can match to your existing PGT spec. We bring sample units to the survey so you operate the hardware before you decide. The written quote names the alternative brand, the equivalent performance data, and the installed price.
It doesn’t. Haven Clause 1: the measured survey and the written quote are the same document. If we encounter concealed damage - rot in the rough opening, for example - we stop work, photograph it, and present a written amendment before proceeding. You approve or decline. No open-ended tickets, no invoice surprises. Call (772) 362-5402 for an exact quote - estimates are free.
Written by Sonia Raman, Owner, Sightline Windows & Doors Jupiter at Sightline Windows & Doors Jupiter, serving Jupiter and nearby areas.