Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Sliding & Patio Doors: The Jupiter Owner’s Guide
We stock and install ECO Window Systems-compatible sliding and patio door assemblies in Jupiter, with typical installed pricing from $1,850 to $4,200 depending on frame size, glass package, and whether the opening requires impact-rated hardware. Most ECO Window Systems units we encounter in Jupiter homes were installed between 2015 and 2022, and the parts we carry fit the ECO 3000, ECO 5000, and ECO Impact series lines without modification. Homeowners usually discover the failure when the door sticks in the track during humid mornings, the lockset won’t engage after a storm, or daylight shows between the sash and frame where the weatherstrip has compressed.
Which ECO Window Systems Models This Applies To
ECO Window Systems marks their sliding and patio door series on a vinyl label pressed into the frame head or jamb edge. The ECO 3000 is their non-impact vinyl line, common in Jupiter’s interior subdivisions like Abacoa; the ECO 5000 upgrades to reinforced framing with optional low-E glazing; the ECO Impact series carries Miami-Dade HVHZ certification and uses stainless steel rollers and multi-point locksets that differ in mounting hole spacing from the standard lines.
The critical compatibility gotcha: ECO Impact doors use a 2.75-inch roller housing center-to-center, while the 3000/5000 series use 2.5-inch. We’ve seen Jupiter homeowners order the wrong roller set online and chew up their track in a single season. We carry both OEM ECO rollers and a matched aftermarket line from C.R. Laurence that meets the same 125-pound dynamic load rating at roughly 30 percent less cost. For locksets, we stock the full ECO keyed and non-keyed catalog, plus the PGT and CGI equivalents where the mounting pattern matches, since ECO Window Systems sourced some hardware from common suppliers between 2017 and 2020. Sightline Windows & Doors Jupiter is an independent service provider with no affiliation to ECO Window Systems.
Signs Your ECO Window Systems Sliding & Patio Door Is Failing

- The door requires shoulder pressure to move. This usually means the tandem roller assembly has flat-spotted or the axle has corroded. In Jupiter, salt air accelerates this even on inland homes because the rollers sit in a trapped pocket where condensation pools.
- Visible gap at the meeting stile when closed. The interlock weatherstrip has compressed past recovery, or the door has dropped on worn rollers and no longer sits square in the frame. Either way, you’re losing conditioned air and taking water risk.
- Lock thumbturn spins without engaging the keeper. The ECO multi-point lock uses a concealed gearbox that strips when forced against a misaligned door. We replace the gearbox, not the whole lockset, when the housing is intact.
- Glass fogs between panes. The dual-pane IG unit has lost its seal. ECO units from 2015-2018 used a particular spacer bar that we document before ordering, since the replacement IG must match the original sightline dimension or the sash won’t reseat.
- Track dented or grooved. A failed roller dragging metal on metal will ruin the track in weeks. We stock extruded aluminum track inserts for ECO 3000/5000 frames; Impact series tracks are integrated and require full frame replacement if damaged.
Before
AfterReplacement Cost & What’s Included
Pricing in Jupiter runs as follows, parts and labor, with the written quote fixed to the measured survey:
| Component | Price Range |
|---|---|
| Roller assembly (pair, installed) | $180 - $340 |
| Multi-point lockset / gearbox | $220 - $480 |
| IG unit replacement (per sash) | $380 - $620 |
| Weatherstrip kit (meeting stile + perimeter) | $160 - $280 |
| Full door assembly, ECO 3000/5000 | $1,850 - $3,100 |
| Full door assembly, ECO Impact | $2,800 - $4,200 |
The range reflects glass package (clear, low-E, or impact-laminated), frame width, and whether the opening needs new trim or siding repair. Every job includes the measured survey you keep, the written scope with line-item pricing, and the documented photo record uploaded to your file. The 365-Day Done Right Promise applies to all hardware and installation labor; IG units carry the manufacturer’s 20-year seal warranty. Haven Clause 1 means the price on the quote is the price on the invoice.
DIY or Call Us?

An owner can safely inspect the roller condition by lifting the door slightly and checking for wobble or grit in the housing. You can also photograph the label and email it to us for parts verification before we dispatch.
Where DIY goes wrong: ECO sliding doors weigh 80 to 140 pounds depending on glass package, and the frame must be supported during roller replacement or the track distorts. The multi-point lock gearbox interfaces with a concealed rod system; forcing it without door alignment will strip the mechanism and convert a $220 repair into a $480 replacement. We don’t recommend owner removal of the sash unless you’ve done it before on this exact model. Call (772) 362-5402 and we’ll schedule a measured survey with written pricing. No charge for the visit if you proceed with the work; if you don’t, you keep the survey document either way.
FAQs
In Jupiter’s climate, expect 7 to 12 years on standard rollers and 10 to 15 on the stainless Impact-series units, assuming the track stays clean and the weep holes remain unblocked. Salt air and sand from beach-proximate homes like those along A1A shorten the lower end by 20 to 30 percent. Call (772) 362-5402 for an exact quote on replacement - estimates are free.
Yes, in most cases. We replace rollers, locksets, weatherstrip, and IG units as individual components; full door replacement is only necessary when the frame is damaged, the track is grooved beyond repair, or you’re upgrading from non-impact to impact-rated. Call (772) 362-5402 for an exact quote - estimates are free.
A roller swap on a standard ECO 3000/5000 takes 90 minutes to two hours including alignment verification; a multi-point lockset runs two to three hours if the door needs re-hanging first. We carry both on the truck for Jupiter calls. Call (772) 362-5402 to schedule - estimates are free.
We stock rollers, locksets, gearboxes, and weatherstrip for all three ECO series on our Jupiter service vehicles; IG units and full door assemblies are ordered to measured spec with a 5 to 10 business day lead time. Call (772) 362-5402 to confirm availability for your model - estimates are free.
Measure once, quote it straight, install it right - that’s the whole business. If your ECO Window Systems sliding or patio door is sticking, leaking, or refusing to lock, call (772) 362-5402. We’ll bring the measured survey, the written price, and the parts that fit.
Written by Sonia Raman, Owner, Sightline Windows & Doors Jupiter at Sightline Windows & Doors Jupiter, serving Jupiter and nearby areas.










Before
After
Before
After
Before
After