Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Window Replacement: The Jupiter Owner’s Guide
CGI window replacement in Jupiter typically runs $340-$780 per opening installed, depending on the series, glass package, and whether the frame is preserved or replaced. We stock CGI-compatible sash packs, balance systems, and impact-rated glass for same-day repair on most residential series found in Jupiter homes built between 2005 and 2020. Most owners discover the failure when a window won’t stay open, fogs between the panes, or the lock no longer seats flush - signs that the sealed unit, balance mechanism, or frame has reached its service limit in South Florida’s salt-air and UV exposure.
Which CGI Models This Applies To
We handle replacement on CGI’s full residential lineup: the Estate Series (aluminum impact), Sentinel Series (vinyl impact), and the older Premiere Series (non-impact aluminum) still common in Jupiter’s Abacoa and Jupiter Country Club builds from the mid-2000s. The part you need depends on the label inside the frame jamb, which carries a six-digit model code and manufacture date. Estate 4400 and 4500 series use a proprietary cam-lock and tilt-wash balance shoe that differs from Sentinel’s constant-force coil system by roughly 3/16 inch in shoe width - a mismatch that will bind if forced.
For glass-only replacement, we match the OEM IG unit by spacer color (black versus silver indicates first versus second generation), Low-E coating side, and impact interlayer thickness. Aftermarket equivalents from CWS and ES Windows exist for some Sentinel configurations, but we default to CGI OEM for Estate series because the frame extrusion tolerances are tighter and third-party sashes often whistle at the jamb in a 25-psf wind load. We carry both on the truck and will show you the difference before ordering.
Signs Your CGI Window Replacement Is Failing

- The sash drops or won’t stay raised. This points to a failed balance system - either a broken coil spring in Sentinel series or a worn block-and-tackle in older Premiere units. In Jupiter, salt corrosion accelerates balance fatigue by roughly 30 percent compared to inland Palm Beach County, so we see this first in oceanfront properties along A1A.
- Fogging or moisture between glass panes. The edge seal on the insulated glass unit has failed, breaking the argon fill and allowing condensation. Once the desiccant saturates, the view stays hazy even on dry days. This is cosmetic at first but becomes structural when the spacer corrodes and the lite risks separating from the frame.
- Lock hardware spins without engaging. The keeper has wallowed out or the cam has stripped, often from repeated slamming in a frame that has settled. On impact-rated units, this isn’t just a convenience issue; the lock is part of the pressure-resistance assembly and a failed lock voids the wind-load rating.
- Frame corners weep water during storms. The weep-hole baffles are clogged with debris, or the sill pan flashing has separated from the subsill. In Jupiter’s summer deluges, water that can’t exit pools in the track and rots the wood buck behind the aluminum - we find this most often in homes where landscapers blow clippings directly against the exterior frame.
- Visible corrosion pitting on exterior hardware. Coastal chloride exposure attacks zinc-diecast operators and stainless steel fasteners alike. Once pitting reaches 1/16 inch depth, the part has lost structural integrity and will fail under design load.
Before
AfterReplacement Cost & What’s Included
| Scope | Price Range (Jupiter) | What’s Included |
|---|---|---|
| Glass-only (IGU swap, existing sash) | $340-$520 | OEM or matched IGU, removal/disposal, re-glaze, re-balance check |
| Sash pack (glass + frame, existing main frame) | $480-$680 | Matched sash, hardware transfer or replacement, seal and trim |
| Full frame replacement (new construction method) | $620-$780 | Complete unit, nailing fin, flashing integration, interior trim repair |
The range reflects glass package (clear versus Low-E versus impact-rated), frame size, and accessibility - second-story openings with no balcony access add ladder time. Every quote is the measured survey you keep; the invoice matches it. Haven Clause 1: Have it in writing. The 365-Day Done Right Promise covers the installation, and the glass carries the manufacturer’s warranty - 10 years on IG seal failure for CGI OEM units.
DIY or Call Us?

An owner can safely check the label location (inside the head jamb, visible when the sash is tilted in), clear weep holes with a pipe cleaner, and photograph the lock mechanism for identification. Beyond that, CGI impact-rated windows contain tempered and laminated glass that weighs 8-12 pounds per square foot and can release stored energy if the sash is dropped during removal. We do not recommend homeowner removal of any sash over 24 inches wide - the torque on the balance shoe can snap the coil and launch hardware into the room.
We stock replacement balances, locks, and standard IGU sizes for Estate and Sentinel series on every Sightline truck in Jupiter. If we don’t have your exact glass, we measure, order, and return - no deposit, no change order. Call (772) 362-5402 to schedule your free estimate. Bring a competitor’s written quote and we’ll review it at no charge under our Free Second Opinion policy.
FAQs
CGI aluminum frames last 25-30 years structurally, but the sealed glass units and balance systems typically need attention at 12-18 years in coastal Jupiter due to salt-air and UV cycling. The Indiantown Road corridor properties we’ve serviced since 2015 are now hitting that window in clusters. Call (772) 362-5402 for an exact quote - estimates are free.
Fogged or cracked insulated glass cannot be repaired; the seal is factory-set and the argon fill cannot be restored in the field. Small surface scratches can be polished, but we only recommend this for non-impact clear glass - polishing removes material and can compromise the heat-treatment stress layer. Call (772) 362-5402 for an exact quote - estimates are free.
A glass-only swap takes 90-120 minutes per opening; a full sash pack runs 2.5-3 hours including trim touch-up. We schedule one opening or a full house - the crew size scales to the scope, and the written price doesn’t change either way. Call (772) 362-5402 for an exact quote - estimates are free.
We stock balances, locks, operators, and standard IGU sizes for Estate and Sentinel series on every Jupiter truck. Custom sizes, geometric shapes, and bronze or black interior finishes ship from CGI’s Miami-Dade facility in 5-10 business days - we measure and order with your approval, no deposit required. Call (772) 362-5402 for an exact quote - estimates are free.
Sightline Windows & Doors Jupiter is independently owned and operated and is not affiliated with CGI Windows & Doors. We are an authorized service provider with access to OEM parts and specifications for eight manufacturer lines, including PGT, CWS, and ES Windows.
Measure once, quote it straight, install it right - that’s the whole business.
Written by Sonia Raman, Owner, Sightline Windows & Doors Jupiter at Sightline Windows & Doors Jupiter, serving Jupiter and nearby areas.










Before
After
Before
After
Before
After