Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Custom & Geometric Windows in Jupiter: What to Know First
As an independent ES Windows service provider, we install and replace custom and geometric ES Windows products in Jupiter homes with a written price before any work starts and a documented photo record when the job is done. Most custom ES Windows orders in Jupiter run 4-6 weeks from measured survey to installation, though geometric shapes with impact-rated glazing can extend to 8 weeks depending on glass tempering schedules. We do not quote allowances - the measured survey you keep and the final invoice are the same document, a principle we have held since 2012. This page is for Jupiter homeowners who already own ES Windows or are specifying them for custom openings, arched entries, or oversized geometric configurations and want a contractor who names the price in dollars before lifting a tool. Call (772) 362-5402 to schedule your free estimate.
How ES Windows Products Fail - and How We Fix Them
- ES Windows 5000 Series fixed geometric windows: The thermal break in the 5000 Series extrusion can separate at the radius points of arched tops after repeated heat cycling in Jupiter’s coastal exposure. We see this most often in Abacoa and Jupiter Inlet Colony installations where southern exposure hits 140°F surface temperatures. Our fix is a full sash replacement with OEM thermal-break assembly, not a field weld that will fail again in two seasons.
- ES Windows 8000 Series custom impact units: The laminated interlayer in impact-rated geometric shapes can delaminate at the corners of trapezoid and pentagon configurations, a stress concentration the rectangular units do not experience. We source replacement IGUs from ES Windows certified fabricators with documented Miami-Dade NOA compliance, not generic laminated stock that voids your wind-load certification.
- ES Windows oversized fixed picture windows: Custom dimensions exceeding 72 inches on either axis in the ES Windows line require steel reinforcement within the frame cavity; we find missing or undersized reinforcement in roughly one-third of competitor installations we inspect in the Jupiter Farms area. We pull the interior trim, document the cavity condition with photos you receive, and install the correct gauge steel per the ES Windows engineering tables.
- ES Windows radius top and half-round units: The glazing bead profile on pre-2018 ES Windows geometric shapes was a single-leg design that hardens and cracks in Florida UV exposure, allowing water intrusion at the sill. We replace with the current two-leg co-extruded bead, which is backward-compatible and carries a 10-year material warranty from the manufacturer.
- ES Windows custom color anodizing: Bronze and black anodized finishes on ES Windows coastal-grade units can chalk and fade unevenly on geometric shapes because the extrusion die lines create micro-variations in anodizing thickness at tight radii. We do not attempt spot repair; we order replacement extrusions with Class I 0.7 mil anodizing minimum, specified on your written quote, and we verify the finish with a calibrated eddy-current meter on delivery.
Our ES Windows Custom & Geometric Windows Process
- 1
Measured survey you keep. Sonia Raman or a verified crew lead arrives with a printed license number, measures the rough opening to 1/16 inch, and records frame squareness, plumb, and sill level. You receive this document before we leave.
- 2
Written scope and price. We specify the exact ES Windows series, glass package, grid pattern, and hardware finish. The quote is the measured survey with product codes and installed price attached - Haven Clause 1, no exceptions.
- 3
Parts decision documented. For warranty-safe repairs, we source OEM ES Windows components. Where OEM is discontinued or lead time exceeds 12 weeks, we specify the quality aftermarket equivalent with written performance data and your approval.
- 4
Installation with evidence. Background-checked, uniformed technicians install per ES Windows published installation instructions and Florida Building Code TAS 201. We photograph each phase: rough opening condition, flashing detail, and final sash operation.
- 5
Testing and sign-off. Every operable unit is cycled 10 times; every fixed unit gets a smoke-pencil air leakage check at the perimeter. You sign the completion document only after verifying the photo record.
- 6
365-Day Done Right Promise activated. The Haven Standard warranty is stamped on your final invoice, not offered as a courtesy. If it’s not done right, we make it right.
Before
AfterWhat ES Windows Custom & Geometric Windows Costs in Jupiter
| Scenario | Typical Range | What Moves the Price |
|---|---|---|
| ES Windows 5000 Series geometric replacement (trapezoid, half-round) | $1,800 - $3,400 per opening | Impact rating, grid pattern, exterior color match to existing |
| ES Windows 8000 Series custom impact arched top | $2,600 - $4,800 per opening | Radius complexity, laminated glass thickness, steel reinforcement required |
| ES Windows oversized fixed picture window (72″+ dimension) | $3,200 - $5,600 per opening | Crane or boom lift access, tempered vs. heat-strengthened specification |
| ES Windows IGU replacement in existing geometric sash | $680 - $1,400 per lite | Low-E coating match, argon fill, warm-edge spacer upgrade |
| Measured survey and written estimate | No charge | Always free, always itemized |
These ranges reflect what we have written on actual Jupiter estimates in the past 18 months, from Tequesta to Juno Beach. Your opening may differ. Call (772) 362-5402 for an exact quote - estimates are free, and we will review any competitor’s written estimate at no charge under our Free Second Opinion policy.
Why Jupiter Homeowners Call Sightline Windows & Doors Jupiter for ES Windows Work
We have installed and serviced ES Windows products across Jupiter since 2012, including a concentrated run of impact replacements along Indiantown Road that taught our crews the specific tolerances of ES Windows geometric hardware. When ES Windows lead times stretch or a series discontinues, we specify from our other verified lines - PGT, CGI, CWS, ECO Window Systems - matched to the performance tier your opening requires, not to inventory on a truck. Every technician is background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The 365-Day Done Right Promise is written into the Haven Standard, not a verbal assurance. And the price on the page is the price on the invoice, because Measure once, quote it straight, install it right - that’s the whole business.
FAQs
No - manufacturer warranties cover defects in materials and workmanship; they are not conditioned on who performs installation, provided the work follows published specifications. We install per ES Windows instructions and document compliance with photos you receive. For warranty claims on product defects, we provide you the original order documentation and NOA certificates to file directly with ES Windows. Call (772) 362-5402 if you need help navigating a warranty submission.
Standard custom shapes from ES Windows run 4-6 weeks from order confirmation; impact-rated geometric units with laminated glass can extend to 8 weeks due to tempering and laminating schedules at the Florida fabricator. We do not quote delivery dates we cannot verify - your written scope includes the expected timeline, and we update you if the fabricator revises it. Call (772) 362-5402 for current lead times on the specific ES Windows series you need.
Yes, with verification. ES Windows maintains color formulas for current and recently discontinued finishes; we order a physical sample chip for your approval before extrusion. For pre-2015 anodized finishes that have weathered, we use a calibrated colorimeter to read the existing frame and specify the closest current match, documented in your file. We do not proceed with production until you sign the color approval. Call (772) 362-5402 to schedule a color match survey.
Replace if the thermal break has failed, the frame is out of square beyond 1/4 inch, or the unit is pre-2012 and parts are discontinued. Repair is viable for IGU seal failure, glazing bead replacement, or hardware issues in units with intact frames and current-series availability. We diagnose on the measured survey and tell you which path costs less over 10 years, not which path invoices higher today. Call (772) 362-5402 for a written diagnosis - estimates are free.
Yes, for all impact-rated and structural modifications. Jupiter requires permits for window replacement when the product is impact-rated or when the rough opening is altered; we pull the permit, schedule inspection, and pass the certificate to you. The permit cost is itemized on your written quote, not added later. Non-impact decorative geometric replacements in existing openings sometimes qualify for owner-builder permits; we advise based on your specific job. Call (772) 362-5402 to confirm permit requirements for your opening.
Ready to get a written price on your ES Windows custom or geometric window project? Call (772) 362-5402 to schedule your free estimate. We serve Jupiter, Tequesta, Juno Beach, and nearby areas.
Written by Sonia Raman, Owner, Sightline Windows & Doors Jupiter at Sightline Windows & Doors Jupiter, serving Jupiter and nearby areas.